Downsizing is a must for current high performance turbocharged SI engines. This is often achieved through the reduction of cylinder number, while keeping constant unit displacement and increasing boost pressure. However, the ensuing higher loads strongly increases the risk of abnormal combustion and thermo-mechanical failures. An alternative path to downsizing is the reduction of cylinder bore: this approach is more expensive, requiring a brand new design of the combustion system, but it also provides some advantages. The goal of the present paper is to explore the potential of bore reduction for achieving a challenging downsizing target, while preserving the engine knock safety margins. A current V8 GDI turbocharged sporting engine is taken as a reference, and a preliminary CFD-3D analysis is carried out in order to define the most suitable bore-to-stroke ratio. On this basis, bore is reduced by 11% at constant stroke, thus obtaining a reduction of about 20% on the engine displacement. In order to achieve the same peak power target, both engine boost and spark advance are adjusted until the knock safety margin of the original engine is met. 3D CFD tools, accurately calibrated on the reference engine, are used to address engine design and the calibration of the operating parameters.
|Data di pubblicazione:||2015|
|Titolo:||Numerical investigation on the effects of bore reduction in a high performance turbocharged GDI engine. 3D investigation of knock tendency|
|Autore/i:||Severi, Elena; D'Adamo, Alessandro; Berni, Fabio; Breda, Sebastiano; Lugli, Mattia; Mattarelli, Enrico|
|Digital Object Identifier (DOI):||http://dx.doi.org/10.1016/j.egypro.2015.12.094|
|Nome del convegno:||69th Conference of the Italian Thermal Engineering Association, ATI 2014|
|Luogo del convegno:||Milan|
|Data del convegno:||10-13 September 2014|
|Citazione:||Numerical investigation on the effects of bore reduction in a high performance turbocharged GDI engine. 3D investigation of knock tendency / Severi, Elena; D'Adamo, Alessandro; Berni, Fabio; Breda, Sebastiano; Lugli, Mattia; Mattarelli, Enrico. - In: ENERGY PROCEDIA. - ISSN 1876-6102. - 81(2015), pp. 846-855. ((Intervento presentato al convegno 69th Conference of the Italian Thermal Engineering Association, ATI 2014 tenutosi a Milan nel 10-13 September 2014.|
|Tipologia||Relazione in Atti di Convegno|
I documenti presenti in Iris Unimore sono rilasciati con licenza Creative Commons Attribuzione - Non commerciale - Non opere derivate 3.0 Italia, salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris