Relazione in Atti di Convegno | Archivio della ricerca dell'Università di Modena e Reggio Emilia

Relazione in Atti di Convegno Home page tipologia

Sfoglia

Prodotti della tipologia (ordinati per Data di deposito in Decrescente ordine): 1 a 20 di 6525

Titolo	Data di deposito	Autore(i)
Numerical Modeling of Aluminum Alloys Fracture for Automotive Applications	8-ago-2017	Cavazzoni, Luca; Miscia, Giuseppe; Rotondella, Vincenzo; Baldini, Andrea
Efficient Implementation of Genetic Algorithms on GP-GPU with Scheduled Persistent CUDA Threads	25-lug-2017	Capodieci, Nicola; Burgio, Paolo
The influence of textured surfaces on the tribological behaviour of hip replacements employing a mass conserving complementarity algorithm	12-lug-2017	Dini, Daniele; Giacopini, Matteo; Giuseppe, Mulas Antonio; Bertocchi, Enrico
Elastohydrodynamic analysis of the conrod small-end of a high performance motorbike engine via a mass conserving cavitation algorithm	11-lug-2017	Mastrandrea, Luca Nicolò; Giacopini, Matteo; Dini, Daniele; Bertocchi, Enrico
A Numerical Investigation on the Potentials of Water Injection as a Fuel Efficiency Enhancer in Highly Downsized GDI Engines	11-lug-2017	D'Adamo, Alessandro; Berni, Fabio; Breda, Sebastiano; Lugli, Mattia; Fontanesi, Stefano; Cantore, Giuseppe
Numerical Investigation on the Effects of Water/Methanol Injection as Knock Suppressor to Increase the Fuel Efficiency of a Highly Downsized GDI Engine	11-lug-2017	Berni, Fabio; Breda, Sebastiano; D'Adamo, Alessandro; Fontanesi, Stefano; Cantore, Giuseppe
CFD Analysis of the Effects of Fuel Composition and Injection Strategy on Mixture Preparation and Fuel Deposit Formation in a GDI Engine	11-lug-2017	Giovannoni, Nicola; Breda, Sebastiano; Paltrinieri, Stefano; D'Adamo, Alessandro; Fontanesi, Stefano; Pulvirenti, Francesco
A repetitive control scheme for industrial robots based on b-spline trajectories	29-giu-2017	Biagiotti, Luigi; Moriello, Lorenzo; Melchiorri, Claudio
A Repetitive Control Scheme Based on B-Spline Trajectories Modification	29-giu-2017	Biagiotti, Luigi; Moriello, Lorenzo; Melchiorri, Claudio
Dynamic modelling of gear pairs	29-giu-2017	Barbieri, Marco; Zippo, Antonio; Strozzi, Matteo; Serafini, Lorenzo; Pellicano, Francesco; Bonori, Giorgio
Experimental and numerical study of MIMO active vibration control	29-giu-2017	Zippo, Antonio; Pellicano, Francesco; Barbieri, Marco; Amabili, Marco
Effects on knock intensity and specific fuel consumption of port water/methanol injection in a turbocharged GDI engine: Comparative analysis	22-giu-2017	Breda, Sebastiano; Berni, Fabio; D'Adamo, Alessandro; Testa, Francesco; Severi, Elena; Cantore, Giuseppe
Large-eddy simulation of cycle-resolved knock in a turbocharged SI engine	22-giu-2017	D'Adamo, Alessandro; Breda, Sebastiano; Cantore, Giuseppe
Numerical investigation on the effects of bore reduction in a high performance turbocharged GDI engine. 3D investigation of knock tendency	22-giu-2017	Severi, Elena; D'Adamo, Alessandro; Berni, Fabio; Breda, Sebastiano; Lugli, Mattia; Mattarelli, Enrico
Effects of fuel composition on charge preparation, combustion and knock tendency in a high performance GDI engine. Part II: Les analysis	22-giu-2017	D'Adamo, Alessandro; Giovannoni, Nicola; Nardi, Luca; Cantore, Giuseppe; D'Angelis, Angelo
Effects of fuel composition on charge preparation, combustion and knock tendency in a high performance GDI engine. Part I: RANS analysis	22-giu-2017	Giovannoni, Nicola; D'Adamo, Alessandro; Nardi, Luca; Cantore, Giuseppe
Effects of Fuel-Induced Piston-Cooling and Fuel Formulation on the Formation of Fuel Deposits and Mixture Stratification in a GDI Engine	22-giu-2017	Giovannoni, Nicola; D'Adamo, Alessandro; Cicalese, Giuseppe; Cantore, Giuseppe
Laser-patterning stainless steel with nonlinear laser lithography for enhanced tribological properties	22-giu-2017	Gnilitskyi, I.; Pavlov, I.; Rotundo, F.; Orazi, L.; Ilday, S.; Martini, C.; Ilday, F.Ö.
Nonlinear Laser Lithography for Enhanced Tribological Properties	22-giu-2017	Gnilitskyi, Iaroslav; Orazi, Leonardo; Rotundo, Fabio; Pavlov, Ihor; Martini, Carla; Ilday, Fatih Ömer
CNC paths optimization in laser texturing of free form surfaces	9-giu-2017	Orazi, L; Montanari, F.; Campana, G.; Tomesani, L.; Cuccolini, G.

Prodotti della tipologia (ordinati per Data di deposito in Decrescente ordine): 1 a 20 di 6525

successivo >

Accesso al fulltext