The paper relates on a numerical method for designing balancing bearing block areas for external gear pumps and motors. At first, a way is presented for obtaining pressure distribution inside spaces between teeth, bearing blocks and casing; the procedure, based on integration of the continuity equation for sealed spaces, permits also the evaluation of some interesting aspects dealing with the influence of rotational speed, dynamic viscosity and gears eccentricity. Then, a method is presented for calculating pressure distribution in the layer bounded by gears sides and bearing blocks. The method, starting from pressure distribution in spaces, is based on the integration of the laspace equation over the whole layer. Axial thrust on bearing blocks and its point of application are then calculated. Finally, the same problem is analysed with a simplified numerical approach, as well based on the integration of the laplace equation, but on the small portion of the layer corresponding to one tooth, with only one boundary condition. At the end, calculations are made for a commercial pump, obtaining balancing aeras very close to the ones designed by the manufacturer.

Pressure balancing in external gear pumps and motors[Bilanciamento delle macchine oleodinamiche a ingranaggi esterni] / Cantore, Giuseppe; Milani, Massimo; Borghi, Massimo. - In: TRASMISSIONI DI POTENZA OLEODINAMICA PNEUMATICA LUBRIFICAZIONE. - ISSN 1122-5017. - STAMPA. - Volume 38, Issue 10:(1997), pp. 84-93.

### Pressure balancing in external gear pumps and motors[Bilanciamento delle macchine oleodinamiche a ingranaggi esterni]

#### Abstract

The paper relates on a numerical method for designing balancing bearing block areas for external gear pumps and motors. At first, a way is presented for obtaining pressure distribution inside spaces between teeth, bearing blocks and casing; the procedure, based on integration of the continuity equation for sealed spaces, permits also the evaluation of some interesting aspects dealing with the influence of rotational speed, dynamic viscosity and gears eccentricity. Then, a method is presented for calculating pressure distribution in the layer bounded by gears sides and bearing blocks. The method, starting from pressure distribution in spaces, is based on the integration of the laspace equation over the whole layer. Axial thrust on bearing blocks and its point of application are then calculated. Finally, the same problem is analysed with a simplified numerical approach, as well based on the integration of the laplace equation, but on the small portion of the layer corresponding to one tooth, with only one boundary condition. At the end, calculations are made for a commercial pump, obtaining balancing aeras very close to the ones designed by the manufacturer.
##### Scheda breve Scheda completa Scheda completa (DC)
1997
Volume 38, Issue 10
84
93
Pressure balancing in external gear pumps and motors[Bilanciamento delle macchine oleodinamiche a ingranaggi esterni] / Cantore, Giuseppe; Milani, Massimo; Borghi, Massimo. - In: TRASMISSIONI DI POTENZA OLEODINAMICA PNEUMATICA LUBRIFICAZIONE. - ISSN 1122-5017. - STAMPA. - Volume 38, Issue 10:(1997), pp. 84-93.
Cantore, Giuseppe; Milani, Massimo; Borghi, Massimo
File in questo prodotto:
Non ci sono file associati a questo prodotto.
##### Pubblicazioni consigliate

I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: `https://hdl.handle.net/11380/741150`
• ND
• ND
• ND