The loosening mechanism is explored of a bush press-fitted into the small end bore of a con-rod. A modelling of the bush loosening mechanism is proposed. Numerical and analytical forecasts of the tensile inertial force responsible for the bush loosening are presented for a purely elastic model. Proper design charts are compiled that allow (a) the initial interference precluding any bush loosening to be determined within the respect of an imposed safety factor and (b) the maximum elastic stress within the small end to be computed for a general inertial load.

The loosening mechanism is explored of a bush press-fitted into the small end bore of a con-rod. A modelling of the bush loosening mechanism is proposed. Numerical and analytical forecasts of the tensile inertial force responsible for the bush loosening are presented for a purely elastic model. Proper design charts are compiled that allow (a) the initial interference precluding any bush loosening to be determined within the respect of an imposed safety factor and (b) the maximum elastic stress within the small end to be computed for a general inertial load. © IMechE 2012.

On the loosening mechanism of a bush press-fitted in the small end of a connecting rod / L., Marmorini; Baldini, Andrea; Bertocchi, Enrico; Giacopini, Matteo; Rosi, Roberto; Strozzi, Antonio. - In: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART D, JOURNAL OF AUTOMOBILE ENGINEERING. - ISSN 0954-4070. - ELETTRONICO. - 226:3(2012), pp. 312-324. [10.1177/0954407011417498]

On the loosening mechanism of a bush press-fitted in the small end of a connecting rod

BALDINI, Andrea;BERTOCCHI, Enrico;GIACOPINI, Matteo;ROSI, Roberto;STROZZI, Antonio
2012

Abstract

The loosening mechanism is explored of a bush press-fitted into the small end bore of a con-rod. A modelling of the bush loosening mechanism is proposed. Numerical and analytical forecasts of the tensile inertial force responsible for the bush loosening are presented for a purely elastic model. Proper design charts are compiled that allow (a) the initial interference precluding any bush loosening to be determined within the respect of an imposed safety factor and (b) the maximum elastic stress within the small end to be computed for a general inertial load. © IMechE 2012.
2012
226
3
312
324
On the loosening mechanism of a bush press-fitted in the small end of a connecting rod / L., Marmorini; Baldini, Andrea; Bertocchi, Enrico; Giacopini, Matteo; Rosi, Roberto; Strozzi, Antonio. - In: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART D, JOURNAL OF AUTOMOBILE ENGINEERING. - ISSN 0954-4070. - ELETTRONICO. - 226:3(2012), pp. 312-324. [10.1177/0954407011417498]
L., Marmorini; Baldini, Andrea; Bertocchi, Enrico; Giacopini, Matteo; Rosi, Roberto; Strozzi, Antonio
File in questo prodotto:
File Dimensione Formato  
4_PartD_2012.pdf

Accesso riservato

Tipologia: Versione dell'autore revisionata e accettata per la pubblicazione
Dimensione 843.34 kB
Formato Adobe PDF
843.34 kB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/709009
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 20
  • ???jsp.display-item.citation.isi??? 10
social impact