This paper deals with the study of the dynamic behavior of a F1 car gear selection hydraulic circuit, when involved in different shift transients.In the first part of the paper the actual circuit is described, and the main hypotheses adopted for the numerical modeling of the hydraulic power unit, of the control valves, of hydraulic pipes and of the actuators involved in the gear shift cycles are introduced. Particular attention is devoted to the actuators actual sequences, as applied by the Electronic Control Unit (ECU) to the servo- valves deputed to actuators control. The strategy to define each gear shift cycle in terms of actuators working position in time domain is chosen, using the frequency map of each servo-valve.A numerical versus experimental comparison of the behavior of the actuators involved in the gear selection (during about 50 ms for an up shifting and 100 ms for a down shifting) is performed, with the target to define the validity limits of the numerical model results.Finally, the paper reports the analysis of those hydraulic variables not controlled by the on-board diagnostic, with the aim to analyze the behavior of the power unit and of the pipes when submitted to the sudden hydraulic power request correspondent to a gear shift.

Analysis of a F1 Car Hydraulic Circuit Dynamic Behaviour / Borghi, Massimo; Milani, Massimo; M., Piraccini; M., Flandoli. - In: SAE TRANSACTIONS - JOURNAL OF PASSENGER CARS: MECHANICAL SYSTEMS. - STAMPA. - 110:(2002), pp. 1285-1290.

Analysis of a F1 Car Hydraulic Circuit Dynamic Behaviour

BORGHI, Massimo;MILANI, Massimo;
2002

Abstract

This paper deals with the study of the dynamic behavior of a F1 car gear selection hydraulic circuit, when involved in different shift transients.In the first part of the paper the actual circuit is described, and the main hypotheses adopted for the numerical modeling of the hydraulic power unit, of the control valves, of hydraulic pipes and of the actuators involved in the gear shift cycles are introduced. Particular attention is devoted to the actuators actual sequences, as applied by the Electronic Control Unit (ECU) to the servo- valves deputed to actuators control. The strategy to define each gear shift cycle in terms of actuators working position in time domain is chosen, using the frequency map of each servo-valve.A numerical versus experimental comparison of the behavior of the actuators involved in the gear selection (during about 50 ms for an up shifting and 100 ms for a down shifting) is performed, with the target to define the validity limits of the numerical model results.Finally, the paper reports the analysis of those hydraulic variables not controlled by the on-board diagnostic, with the aim to analyze the behavior of the power unit and of the pipes when submitted to the sudden hydraulic power request correspondent to a gear shift.
110
1285
1290
Analysis of a F1 Car Hydraulic Circuit Dynamic Behaviour / Borghi, Massimo; Milani, Massimo; M., Piraccini; M., Flandoli. - In: SAE TRANSACTIONS - JOURNAL OF PASSENGER CARS: MECHANICAL SYSTEMS. - STAMPA. - 110:(2002), pp. 1285-1290.
Borghi, Massimo; Milani, Massimo; M., Piraccini; M., Flandoli
File in questo prodotto:
File Dimensione Formato  
SAE 2001 01 1162.pdf

non disponibili

Tipologia: Pre-print dell'autore (bozza pre referaggio)
Dimensione 323.51 kB
Formato Adobe PDF
323.51 kB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

Caricamento pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/455033
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact