In this paper, a novel repetitive control scheme is presented and discussed, based on the so called B-spline filters. This type of dynamic filters are able to provide a Bspline trajectory if they are fed with the sequence of proper control points that define the trajectory itself. Therefore, they are ideal tools for generating online the reference signal with the prescribed level of smoothness for driving dynamic systems, e.g. with a feedforward compensator. In particular, the so-called Continuous Zero Phase Error Tracking Controller (ZPETC) can be used for tracking control of non-minimum phase systems but because of its open-loop nature cannot guarantee robustness with respect to modelling errors and exogenous disturbances. For this reason, ZPETC and trajectory generator have been embedded in a repetitive control scheme that allows to nullify interpolation errors even in non-ideal conditions, provided that the desired reference trajectory and the disturbances are periodic. The asymptotic stability of the overall control scheme has been proved and its performances have been demonstrated by considering a well-known non-minimum phase plant, i.e. a flexible link arm.
Repetitive control of non-minimum phase systems along B-spline trajectories / Biagiotti, Luigi; Califano, Federico; Melchiorri, Claudio. - (2016), pp. 5496-5501. (Intervento presentato al convegno 55th IEEE Conference on Decision and Control, CDC 2016 tenutosi a Las Vegas, USA nel 2016) [10.1109/CDC.2016.7799113].
Repetitive control of non-minimum phase systems along B-spline trajectories
BIAGIOTTI, Luigi;
2016
Abstract
In this paper, a novel repetitive control scheme is presented and discussed, based on the so called B-spline filters. This type of dynamic filters are able to provide a Bspline trajectory if they are fed with the sequence of proper control points that define the trajectory itself. Therefore, they are ideal tools for generating online the reference signal with the prescribed level of smoothness for driving dynamic systems, e.g. with a feedforward compensator. In particular, the so-called Continuous Zero Phase Error Tracking Controller (ZPETC) can be used for tracking control of non-minimum phase systems but because of its open-loop nature cannot guarantee robustness with respect to modelling errors and exogenous disturbances. For this reason, ZPETC and trajectory generator have been embedded in a repetitive control scheme that allows to nullify interpolation errors even in non-ideal conditions, provided that the desired reference trajectory and the disturbances are periodic. The asymptotic stability of the overall control scheme has been proved and its performances have been demonstrated by considering a well-known non-minimum phase plant, i.e. a flexible link arm.Pubblicazioni consigliate
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris