Nowadays civil protection and environment safeguard are of topical interest. The hydro-geological instability and landslides as well, in fact, are serious problems that unfortunately characterize our whole country. The consequences are sometimes severe and there is more to deal with such as emergencies and disasters directly affecting the population. Geomatics, in this sense, offers a wide variety of methodologies and technologies, both well-established and well-advanced, functioning as an important support to the control and monitoring of territory. Key studies concern the phenomenon itself, risk prevention and emergency management . Concerning that, the present paper presents the design and implementation of an integrated system based on topographical and geotechnical instrumentation with the purpose to continuously monitor a landslide. Two case studies will be presented: they are both located in the Apennines of Emilia-Romagna Region. The system consists of a robotic total station located in a geologically stable area together with a GNSS (Global Navigation Satellite System) receiver which acts as a permanent master station. The robotic total station regularly runs several times a day repeating the same action, which consists on measuring a series of prisms positioned both inside and outside of the landslide body. A two-directions inclinometer monitors the stability of the monument in real-time mode. An additional GNSS, acting as a rover receiver, has been placed at the edge of the landslide to assess over time the possible extension of the phenomenon (continuous monitoring). The monitoring system, operating in continuous mode, is remotely managed; this allows a constant control on displacements and ensures a rapid and effective action in case of emergency . Together with the topographic instruments, some extensometers, inclinometers and piezometers were installed with the aim to study the deformation mechanism of the investigated phenomenon. LIDAR (Light Detection And Ranging) surveys were carried out to obtain the DTM (Digital Terrain Model) and high accuracy orthophotos of the area. Periodical flights were performed to detect and study the subsequent reactivations. The present research aims to present some phenomena, which are similar to many others in the country, with the aim of strengthening the role, the importance and the usefulness of Geomatics in the monitoring of the territory.

La protezione della popolazione e la tutela del territorio sono temi di grande attualità. Il dissesto idrogeologico unitamente all‟instabilità di versante, infatti, sono problemi seri che purtroppo caratterizzano l‟intero territorio nazionale. Le conseguenze sono a volte anche gravi e ci si trova a fronteggiare situazioni di emergenza e disastro che interessano direttamente la popolazione. La Geomatica in questo senso offre una vasta gamma di metodologie e tecnologie, sia consolidate sia all‟avanguardia, che costituiscono un supporto importante al controllo e al monitoraggio del territorio in chiave di studio dei fenomeni, di prevenzione dei rischi e di gestione dell‟emergenza. A tal proposito, in questo contributo si presenta la progettazione e realizzazione di un sistema integrato basato su strumentazione topografica e geotecnica al fine di monitorare in maniera continua dei fenomeni franosi situati sugli Appennini Emiliani. Il sistema è composto da una stazione totale robotizzata posizionata in zona ritenuta geologicamente stabile e collocata con un sistema GNSS (Global Navigation Satellite System) che funge da stazione master permanente. La stazione totale robotizzata esegue una serie di misure periodiche e ripetute collimando prismi posizionati sia all‟interno sia all‟esterno del corpo di frana. Un inclinometro bidirezionale monitora la stabilità della monumentazione nel tempo. Un ulteriore sistema GNSS è stato posto in acquisizione continua al bordo della frana per valutare nel tempo l‟eventuale ampliamento del fenomeno. Tutto questo sistema lavora in continuo ed è gestito da remoto in modo da permettere un costante controllo degli spostamenti e garantire un intervento rapido ed efficace in caso di necessità. Unitamente alla strumentazione topografica estensimetri, inclinometri e piezometri sono stati installati in punti di interesse per valutare il meccanismo di deformazione del fenomeno. Rilievi LIDAR (LIght Detection And Ranging), per ottenere il DTM (Digital Terrain Model) e le ortofoto dell‟area, sono stati eseguiti periodicamente nel tempo al fine di testimoniare e studiare le successive riattivazioni. Il lavoro vuole presentare un fenomeno, analogo a tanti altri presenti sul territorio nazionale, con l‟intento di rafforzare il ruolo, l‟importanza e l‟utilità della Geomatica nel monitoraggio del territorio.

Rilievi integrati per il monitoraggio e la gestione dell’instabilità dei versanti / Bertacchini, Eleonora; Castagnetti, Cristina; Capra, Alessandro; Rivola, Riccardo; Corsini, Alessandro. - STAMPA. - (2011), pp. 89-98.

Rilievi integrati per il monitoraggio e la gestione dell’instabilità dei versanti

BERTACCHINI, Eleonora;CASTAGNETTI, Cristina;CAPRA, Alessandro;RIVOLA, RICCARDO;CORSINI, Alessandro
2011

Abstract

Nowadays civil protection and environment safeguard are of topical interest. The hydro-geological instability and landslides as well, in fact, are serious problems that unfortunately characterize our whole country. The consequences are sometimes severe and there is more to deal with such as emergencies and disasters directly affecting the population. Geomatics, in this sense, offers a wide variety of methodologies and technologies, both well-established and well-advanced, functioning as an important support to the control and monitoring of territory. Key studies concern the phenomenon itself, risk prevention and emergency management . Concerning that, the present paper presents the design and implementation of an integrated system based on topographical and geotechnical instrumentation with the purpose to continuously monitor a landslide. Two case studies will be presented: they are both located in the Apennines of Emilia-Romagna Region. The system consists of a robotic total station located in a geologically stable area together with a GNSS (Global Navigation Satellite System) receiver which acts as a permanent master station. The robotic total station regularly runs several times a day repeating the same action, which consists on measuring a series of prisms positioned both inside and outside of the landslide body. A two-directions inclinometer monitors the stability of the monument in real-time mode. An additional GNSS, acting as a rover receiver, has been placed at the edge of the landslide to assess over time the possible extension of the phenomenon (continuous monitoring). The monitoring system, operating in continuous mode, is remotely managed; this allows a constant control on displacements and ensures a rapid and effective action in case of emergency . Together with the topographic instruments, some extensometers, inclinometers and piezometers were installed with the aim to study the deformation mechanism of the investigated phenomenon. LIDAR (Light Detection And Ranging) surveys were carried out to obtain the DTM (Digital Terrain Model) and high accuracy orthophotos of the area. Periodical flights were performed to detect and study the subsequent reactivations. The present research aims to present some phenomena, which are similar to many others in the country, with the aim of strengthening the role, the importance and the usefulness of Geomatics in the monitoring of the territory.
2011
Geomatica: le radici del futuro – Tributo a Sergio Dequal e Riccardo Galetto
Manzino, Ambrogio; Spalla, Anna
8890193964
Edizioni SIFET
ITALIA
Rilievi integrati per il monitoraggio e la gestione dell’instabilità dei versanti / Bertacchini, Eleonora; Castagnetti, Cristina; Capra, Alessandro; Rivola, Riccardo; Corsini, Alessandro. - STAMPA. - (2011), pp. 89-98.
Bertacchini, Eleonora; Castagnetti, Cristina; Capra, Alessandro; Rivola, Riccardo; Corsini, Alessandro
File in questo prodotto:
File Dimensione Formato  
2011_TributoSD&RG_Frane.pdf

Accesso riservato

Descrizione: Articolo pubblicato
Tipologia: Versione pubblicata dall'editore
Dimensione 1.69 MB
Formato Adobe PDF
1.69 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/709030
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact