In this paper we are concerned with the problem of a crack lying at the interface between dissimilar materials with microstructure undergoing antiplane deformations. The micropolar behaviour of the materials is described by the theory of couple stress elasticity developed by Koiter (1964). This constitutive model includes the characteristic lengths in bending and torsion and thus it is able to account for the underlying microstructure of the two materials. We perform an asymptotic analysis to investigate the behaviour of the solution near the crack tip. It turns out that the stress singularity at the crack tip is strongly influenced by the microstructural parameters and it may or may not showoscillatory behaviour depending on the ratio between the characteristic lengths

Mode III interfacial crack in the presence of couple stress elastic materials / A., Piccolroaz; G., Mishuris; Radi, Enrico. - In: ENGINEERING FRACTURE MECHANICS. - ISSN 0013-7944. - ELETTRONICO. - 80:(2012), pp. 60-71. [10.1016/j.engfracmech.2011.03.001]

Mode III interfacial crack in the presence of couple stress elastic materials

RADI, Enrico
2012

Abstract

In this paper we are concerned with the problem of a crack lying at the interface between dissimilar materials with microstructure undergoing antiplane deformations. The micropolar behaviour of the materials is described by the theory of couple stress elasticity developed by Koiter (1964). This constitutive model includes the characteristic lengths in bending and torsion and thus it is able to account for the underlying microstructure of the two materials. We perform an asymptotic analysis to investigate the behaviour of the solution near the crack tip. It turns out that the stress singularity at the crack tip is strongly influenced by the microstructural parameters and it may or may not showoscillatory behaviour depending on the ratio between the characteristic lengths
2012
80
60
71
Mode III interfacial crack in the presence of couple stress elastic materials / A., Piccolroaz; G., Mishuris; Radi, Enrico. - In: ENGINEERING FRACTURE MECHANICS. - ISSN 0013-7944. - ELETTRONICO. - 80:(2012), pp. 60-71. [10.1016/j.engfracmech.2011.03.001]
A., Piccolroaz; G., Mishuris; Radi, Enrico
File in questo prodotto:
File Dimensione Formato  
EFM 2012.pdf

Accesso riservato

Descrizione: articolo principale
Tipologia: Versione pubblicata dall'editore
Dimensione 359.92 kB
Formato Adobe PDF
359.92 kB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/648699
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 40
  • ???jsp.display-item.citation.isi??? 39
social impact