Two alternative approaches, enamelling and plasma spraying, were tested to deposit coatings made with two different bioactive glasses: the established Bioglass ® 45S5, which is considered as a term of comparison, and the experimental BioK. The strong points and weaknesses of the two methods were highlighted. From the analysed samples, it resulted that the enamelling approach works well on thermally stable substrates and creates a strong bond, characterized by a compositional gradient, with alumina substrates. However the coating thickness must be carefully controlled to limit the thermal residual stresses and the glass formulation should be designed to reduce the glass tendency to crystallize. Instead plasma spraying is suitable for any kind of substrate and is highly automatizable, but the equipment is expensive and the coatings are likely to retain some defectiveness, which makes a post-deposition thermal treatment necessary. Both enamelling and plasma spraying may induce crystallization phenomena, depending on the glass formulation. The introduction of potassium oxide in the glass composition, such as in the BioK, may be useful to hinder the crystallization.

Different approaches to produce coatings with bioactive glasses: enameling vs plasma spraying / Cannillo, Valeria; Sola, Antonella. - In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. - ISSN 0955-2219. - STAMPA. - 30:(2010), pp. 2031-2039. [10.1016/j.jeurceramsoc.2010.04.021]

Different approaches to produce coatings with bioactive glasses: enameling vs plasma spraying

CANNILLO, Valeria;SOLA, Antonella
2010

Abstract

Two alternative approaches, enamelling and plasma spraying, were tested to deposit coatings made with two different bioactive glasses: the established Bioglass ® 45S5, which is considered as a term of comparison, and the experimental BioK. The strong points and weaknesses of the two methods were highlighted. From the analysed samples, it resulted that the enamelling approach works well on thermally stable substrates and creates a strong bond, characterized by a compositional gradient, with alumina substrates. However the coating thickness must be carefully controlled to limit the thermal residual stresses and the glass formulation should be designed to reduce the glass tendency to crystallize. Instead plasma spraying is suitable for any kind of substrate and is highly automatizable, but the equipment is expensive and the coatings are likely to retain some defectiveness, which makes a post-deposition thermal treatment necessary. Both enamelling and plasma spraying may induce crystallization phenomena, depending on the glass formulation. The introduction of potassium oxide in the glass composition, such as in the BioK, may be useful to hinder the crystallization.
30
2031
2039
Different approaches to produce coatings with bioactive glasses: enameling vs plasma spraying / Cannillo, Valeria; Sola, Antonella. - In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. - ISSN 0955-2219. - STAMPA. - 30:(2010), pp. 2031-2039. [10.1016/j.jeurceramsoc.2010.04.021]
Cannillo, Valeria; Sola, Antonella
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Caricamento pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: http://hdl.handle.net/11380/640549
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 42
  • ???jsp.display-item.citation.isi??? 38
social impact