Asbestos was widely used as a building material prior to the 1970´s. It is well known that asbestos is a health hazard and its progressive elimination is a priority for pollution prevention. Asbestos can be transformed to non-hazardous silicate phases by microwave thermal treatment. The aim of this investigation is to describe the microwave inertization process of asbestos containing waste (ACW) and its recycling in porcelain stoneware tiles, porous single-fired wall tiles and ceramic bricks following industrial manufacture procedure. Inertised asbestos powder was added in the percentages of 1, 3, and 5 wt.% to commercially available compositions and then fired following industrial thermal cycles. Water absorption and linear shrinkage of the obtained industrial products do not present significant variations with additions up to 5 wt.% of microwave inertised ACW.

MICROWAVE THERMAL INERTISATION OF ASBESTOS CONTAINING WASTE AND ITS RECYCLING IN TRADITIONAL CERAMICS / Leonelli, Cristina; Veronesi, Paolo; Boccaccini, Dino Norberto; Rivasi, Maria Rosa; Barbieri, Luisa; Andreola, Nora Maria; Lancellotti, Isabella; Rabitti, Daniela; Pellacani, Gian Carlo. - In: JOURNAL OF HAZARDOUS MATERIALS. - ISSN 0304-3894. - STAMPA. - 135(1-3):(2006), pp. 149-155.

MICROWAVE THERMAL INERTISATION OF ASBESTOS CONTAINING WASTE AND ITS RECYCLING IN TRADITIONAL CERAMICS

LEONELLI, Cristina;VERONESI, Paolo;BOCCACCINI, Dino Norberto;RIVASI, Maria Rosa;BARBIERI, Luisa;ANDREOLA, Nora Maria;LANCELLOTTI, Isabella;RABITTI, Daniela;PELLACANI, Gian Carlo
2006

Abstract

Asbestos was widely used as a building material prior to the 1970´s. It is well known that asbestos is a health hazard and its progressive elimination is a priority for pollution prevention. Asbestos can be transformed to non-hazardous silicate phases by microwave thermal treatment. The aim of this investigation is to describe the microwave inertization process of asbestos containing waste (ACW) and its recycling in porcelain stoneware tiles, porous single-fired wall tiles and ceramic bricks following industrial manufacture procedure. Inertised asbestos powder was added in the percentages of 1, 3, and 5 wt.% to commercially available compositions and then fired following industrial thermal cycles. Water absorption and linear shrinkage of the obtained industrial products do not present significant variations with additions up to 5 wt.% of microwave inertised ACW.
135(1-3)
149
155
MICROWAVE THERMAL INERTISATION OF ASBESTOS CONTAINING WASTE AND ITS RECYCLING IN TRADITIONAL CERAMICS / Leonelli, Cristina; Veronesi, Paolo; Boccaccini, Dino Norberto; Rivasi, Maria Rosa; Barbieri, Luisa; Andreola, Nora Maria; Lancellotti, Isabella; Rabitti, Daniela; Pellacani, Gian Carlo. - In: JOURNAL OF HAZARDOUS MATERIALS. - ISSN 0304-3894. - STAMPA. - 135(1-3):(2006), pp. 149-155.
Leonelli, Cristina; Veronesi, Paolo; Boccaccini, Dino Norberto; Rivasi, Maria Rosa; Barbieri, Luisa; Andreola, Nora Maria; Lancellotti, Isabella; Rabitti, Daniela; Pellacani, Gian Carlo
File in questo prodotto:
File Dimensione Formato  
1.pdf

non disponibili

Tipologia: Post-print dell'autore (bozza post referaggio)
Dimensione 372.94 kB
Formato Adobe PDF
372.94 kB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

Caricamento pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/310694
Citazioni
  • ???jsp.display-item.citation.pmc??? 2
  • Scopus 103
  • ???jsp.display-item.citation.isi??? 94
social impact