Porcelainized stoneware tiles containing up to 20 wt.% of municipal incinerator grate slag have been fabricated by cold uniaxial pressing and conventional fast firing cycles. The sinterability of these samples was investigated from density and shrinkage measurements together with mechanical (Vickers microhardness and Young's modulus) and esthetical (spot resistance and colour parameters analysis) properties. The comparison with the porcelainized stoneware tiles containing no waste suggest a good compatibility between the ceramic body and the waste that does not significantly change the properties of the final products and the conditions of the firing cycle. Nevertheless, the porosity increase, proportional to the waste content, causes a decrease in density, shrinkage, spot resistance and whiteness. (C) 2002 Elsevier Science Ltd. All rights reserved.

Utilisation of municipal incinerator grate slag for manufacturing porcelainized stoneware tiles manufacturing / Andreola, Nora Maria; Barbieri, Luisa; Corradi, Anna; Lancellotti, Isabella; Manfredini, Tiziano. - In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. - ISSN 0955-2219. - STAMPA. - 22:9-10(2002), pp. 1457-1462. [10.1016/S0955-2219(01)00460-5]

Utilisation of municipal incinerator grate slag for manufacturing porcelainized stoneware tiles manufacturing

ANDREOLA, Nora Maria;BARBIERI, Luisa;CORRADI, Anna;LANCELLOTTI, Isabella;MANFREDINI, Tiziano
2002

Abstract

Porcelainized stoneware tiles containing up to 20 wt.% of municipal incinerator grate slag have been fabricated by cold uniaxial pressing and conventional fast firing cycles. The sinterability of these samples was investigated from density and shrinkage measurements together with mechanical (Vickers microhardness and Young's modulus) and esthetical (spot resistance and colour parameters analysis) properties. The comparison with the porcelainized stoneware tiles containing no waste suggest a good compatibility between the ceramic body and the waste that does not significantly change the properties of the final products and the conditions of the firing cycle. Nevertheless, the porosity increase, proportional to the waste content, causes a decrease in density, shrinkage, spot resistance and whiteness. (C) 2002 Elsevier Science Ltd. All rights reserved.
2002
22
9-10
1457
1462
Utilisation of municipal incinerator grate slag for manufacturing porcelainized stoneware tiles manufacturing / Andreola, Nora Maria; Barbieri, Luisa; Corradi, Anna; Lancellotti, Isabella; Manfredini, Tiziano. - In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. - ISSN 0955-2219. - STAMPA. - 22:9-10(2002), pp. 1457-1462. [10.1016/S0955-2219(01)00460-5]
Andreola, Nora Maria; Barbieri, Luisa; Corradi, Anna; Lancellotti, Isabella; Manfredini, Tiziano
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/310324
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 74
  • ???jsp.display-item.citation.isi??? 51
social impact