A glass belonging to the CaO-ZrO2-SiO2 (CZS) System has been plasma-sprayed on ceramic tiles. The crystallization behavior of plasma-sprayed coatings has been compared to the devitrification processes of the bulk glass and sintered glass powders of the same composition. DTA experiments reveal a crystallization peak at about 1323 K, with a quite high activation energy, indicating the bulk crystallization process is difficult, because of the high viscosity of the glass. Bulk samples require higher treatment temperatures (approximate to 1423 K) to develop significant amounts of crystalline phases. Furthermore, being the crystallization mostly superficial, high residual stresses develop between the crystalline surface and the glassy core. Sintered samples are fully crystalline, because crystallization starts from the particle surface, the specimens show a considerable shrinkage. After an 1123 K 30´ + 1323 K 15´ thermal treatment, plasma-sprayed coatings, possessing numerous defects and a slight degree of devitrification induced by thermal cycling during plasma deposition, become very well sintered and completely crystalline, because the as-sprayed microstructural features promote heterogeneous nucleation. In this case, the shrinkage is quite negligible, since partial sintering occurs already during the deposition process. In the fully crystalline coatings, excellent mechanical properties (microhardness, fracture toughness and abrasion resistance) are achieved, overcoming those of traditional industrial glazes.
Influence of the manufacturing process on the crystallization behavior of a CZS glass system / Lusvarghi, Luca; Manfredini, Tiziano; Siligardi, Cristina; Bolelli, Giovanni. - In: JOURNAL OF NON-CRYSTALLINE SOLIDS. - ISSN 0022-3093. - STAMPA. - 351:30-32(2005), pp. 2537-2546. [10.1016/j.jnoncrysol.2005.06.047]
Influence of the manufacturing process on the crystallization behavior of a CZS glass system
LUSVARGHI, Luca;MANFREDINI, Tiziano;SILIGARDI, Cristina;BOLELLI, Giovanni
2005
Abstract
A glass belonging to the CaO-ZrO2-SiO2 (CZS) System has been plasma-sprayed on ceramic tiles. The crystallization behavior of plasma-sprayed coatings has been compared to the devitrification processes of the bulk glass and sintered glass powders of the same composition. DTA experiments reveal a crystallization peak at about 1323 K, with a quite high activation energy, indicating the bulk crystallization process is difficult, because of the high viscosity of the glass. Bulk samples require higher treatment temperatures (approximate to 1423 K) to develop significant amounts of crystalline phases. Furthermore, being the crystallization mostly superficial, high residual stresses develop between the crystalline surface and the glassy core. Sintered samples are fully crystalline, because crystallization starts from the particle surface, the specimens show a considerable shrinkage. After an 1123 K 30´ + 1323 K 15´ thermal treatment, plasma-sprayed coatings, possessing numerous defects and a slight degree of devitrification induced by thermal cycling during plasma deposition, become very well sintered and completely crystalline, because the as-sprayed microstructural features promote heterogeneous nucleation. In this case, the shrinkage is quite negligible, since partial sintering occurs already during the deposition process. In the fully crystalline coatings, excellent mechanical properties (microhardness, fracture toughness and abrasion resistance) are achieved, overcoming those of traditional industrial glazes.File | Dimensione | Formato | |
---|---|---|---|
JNCS.pdf
Accesso riservato
Tipologia:
Abstract
Dimensione
708.1 kB
Formato
Adobe PDF
|
708.1 kB | Adobe PDF | Visualizza/Apri Richiedi una copia |
Pubblicazioni consigliate
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris