The mechanical properties of composite glass-alumina coatings produced by plasma spraying, as described in Part 1, were numerically characterized with relation to the peculiar microstructure. Finite element meshes were created for the most significant coating typologies, starting from SEM acquired microstructures. The coatings elastic properties and fracture behaviour were characterized as a function of relevant microstructural features. The results confirm that the coatings are anisotropic, with a lower elastic modulus in the direction perpendicular to the substrate plane (spray direction), because of the lamellar microstructure; increasing the alumina volume fraction increases the elastic modulus value both in the spray and transverse direction. Moreover, it is found that cracks start from large, irregular pores, and propagate easily through the glass areas, but are stopped by alumina. Smaller individual glass areas hinder crack propagation. The post-deposition thermal treatment described in Part I produces tensile residual stresses in the glass and compressive ones in the alumina; thus, the arresting effect of the latter on cracks propagation is greatly enhanced. (c) 2005 Elsevier B.V. All rights reserved.

Glass alumina composite coatings by plasma spraying. Part II: microstructure-based modelling of mechanical properties / Bolelli, Giovanni; Cannillo, Valeria; Lusvarghi, Luca; Manfredini, Tiziano; Montorsi, Monia. - In: SURFACE & COATINGS TECHNOLOGY. - ISSN 0257-8972. - STAMPA. - 201:(2006), pp. 474-486.

Glass alumina composite coatings by plasma spraying. Part II: microstructure-based modelling of mechanical properties

BOLELLI, Giovanni;CANNILLO, Valeria;LUSVARGHI, Luca;MANFREDINI, Tiziano;MONTORSI, Monia
2006

Abstract

The mechanical properties of composite glass-alumina coatings produced by plasma spraying, as described in Part 1, were numerically characterized with relation to the peculiar microstructure. Finite element meshes were created for the most significant coating typologies, starting from SEM acquired microstructures. The coatings elastic properties and fracture behaviour were characterized as a function of relevant microstructural features. The results confirm that the coatings are anisotropic, with a lower elastic modulus in the direction perpendicular to the substrate plane (spray direction), because of the lamellar microstructure; increasing the alumina volume fraction increases the elastic modulus value both in the spray and transverse direction. Moreover, it is found that cracks start from large, irregular pores, and propagate easily through the glass areas, but are stopped by alumina. Smaller individual glass areas hinder crack propagation. The post-deposition thermal treatment described in Part I produces tensile residual stresses in the glass and compressive ones in the alumina; thus, the arresting effect of the latter on cracks propagation is greatly enhanced. (c) 2005 Elsevier B.V. All rights reserved.
201
474
486
Glass alumina composite coatings by plasma spraying. Part II: microstructure-based modelling of mechanical properties / Bolelli, Giovanni; Cannillo, Valeria; Lusvarghi, Luca; Manfredini, Tiziano; Montorsi, Monia. - In: SURFACE & COATINGS TECHNOLOGY. - ISSN 0257-8972. - STAMPA. - 201:(2006), pp. 474-486.
Bolelli, Giovanni; Cannillo, Valeria; Lusvarghi, Luca; Manfredini, Tiziano; Montorsi, Monia
File in questo prodotto:
File Dimensione Formato  
Glass-alumina composite coatings by plasma spraying.pdf

non disponibili

Tipologia: Versione dell'editore (versione pubblicata)
Dimensione 6.91 MB
Formato Adobe PDF
6.91 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

Caricamento pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: http://hdl.handle.net/11380/305060
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 6
  • ???jsp.display-item.citation.isi??? 6
social impact