This article compares the static strength and the fatigue strength (under repeated stress) of axially loaded taper press fits, either dry or bonded with an anaerobic adhesive. A general increase of both static and fatigue strength with the contact pressure is observed, the strength buildup being greater for the dry joints than for the bonded ones. No significant difference between the static and the fatigue strength is measured for the dry joints. For the bonded joints, the fatigue strength decay is nearly independent (in absolute terms) of the assembly contact pressure.
Fatigue testing of taper press fits bonded with anaerobic adhesives / Dragoni, Eugenio. - In: JOURNAL OF ADHESION. - ISSN 0021-8464. - STAMPA. - 79:8-9(2003), pp. 729-747. [10.1080/00218460309546]
Fatigue testing of taper press fits bonded with anaerobic adhesives
DRAGONI, Eugenio
2003
Abstract
This article compares the static strength and the fatigue strength (under repeated stress) of axially loaded taper press fits, either dry or bonded with an anaerobic adhesive. A general increase of both static and fatigue strength with the contact pressure is observed, the strength buildup being greater for the dry joints than for the bonded ones. No significant difference between the static and the fatigue strength is measured for the dry joints. For the bonded joints, the fatigue strength decay is nearly independent (in absolute terms) of the assembly contact pressure.
Pubblicazioni consigliate
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris
