High-performance fiber-reinforced cementitious composites (HPFRCCs) are increasingly used as strengthening overlays for reinforced concrete (RC) structures. While their short-term behavior is well documented, the long-term response of the interface between existing concrete and HPFRCC overlays remains a challenging issue. This paper proposes a time-dependent mechanical model to predict the evolution of stresses, strains, and slip at the interface of RC members strengthened with HPFRCC layers. The model combines a linear viscoelastic formulation accounting for creep and shrinkage of both materials with an experimentally calibrated cohesive law governing the interfacial bond response. An experimental campaign on a small-scale normal-strength concrete (NSC)–HPFRCC composite beam subjected to sustained loading is conducted to validate the model, showing good agreement between measured and predicted slip evolution over six months. Numerical results highlight that differential creep and shrinkage induce significant stress redistribution over time, with tensile stresses in the NSC increasing by more than 2000% from a very low initial level while remaining below the material tensile strength under the investigated service conditions. A sensitivity analysis further shows that very small interface slip is consistent with a highly stiff connection but should not be interpreted independently from interface stiffness, strength and deformation capacity.
Effectiveness investigation of HPFRCC strengthening layers through a time-dependent mechanical model / Sanchez, J., Savino, V., Lanzoni, L., Tarantino, A.M., Viviani, M.. - In: COMPOSITE STRUCTURES. - ISSN 0263-8223. - 121119:(2026), pp. 1-14. [10.1016/j.compstruct.2026.121119]
Effectiveness investigation of HPFRCC strengthening layers through a time-dependent mechanical model
Justine Sanchez;Luca Lanzoni
;Angelo Marcello Tarantino;
2026
Abstract
High-performance fiber-reinforced cementitious composites (HPFRCCs) are increasingly used as strengthening overlays for reinforced concrete (RC) structures. While their short-term behavior is well documented, the long-term response of the interface between existing concrete and HPFRCC overlays remains a challenging issue. This paper proposes a time-dependent mechanical model to predict the evolution of stresses, strains, and slip at the interface of RC members strengthened with HPFRCC layers. The model combines a linear viscoelastic formulation accounting for creep and shrinkage of both materials with an experimentally calibrated cohesive law governing the interfacial bond response. An experimental campaign on a small-scale normal-strength concrete (NSC)–HPFRCC composite beam subjected to sustained loading is conducted to validate the model, showing good agreement between measured and predicted slip evolution over six months. Numerical results highlight that differential creep and shrinkage induce significant stress redistribution over time, with tensile stresses in the NSC increasing by more than 2000% from a very low initial level while remaining below the material tensile strength under the investigated service conditions. A sensitivity analysis further shows that very small interface slip is consistent with a highly stiff connection but should not be interpreted independently from interface stiffness, strength and deformation capacity.| File | Dimensione | Formato | |
|---|---|---|---|
|
COST-121119.pdf
Open access
Descrizione: articolo principale
Tipologia:
AO - Versione originale dell'autore proposta per la pubblicazione
Dimensione
5.35 MB
Formato
Adobe PDF
|
5.35 MB | Adobe PDF | Visualizza/Apri |
Pubblicazioni consigliate

I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris





