The present study demonstrates the feasibility of stereolithographic 3D printing of composite objects based on acrylic photocurable formulations, containing in situ generated silver nanoparticles (AgNPs). The laser radiation of a commercial stereolithography printer was used to both selectively cure, layer by layer, the acrylic resin and to reduce a silver salt to AgNPs. The presence of the filler causes an increase in the physical and mechanical properties of the samples that become significantly stiffer and stronger than the pristine matrix.

Advanced resins for stereolithography: In situ generation of silver nanoparticles / Taormina, G.; Sciancalpore, C.; Messori, M.; Bondioli, F.. - 1981:(2018), p. 020065. ((Intervento presentato al convegno 9th International Conference on Times of Polymers and Composites: From Aerospace to Nanotechnology tenutosi a ita nel 2018 [10.1063/1.5045927].

Advanced resins for stereolithography: In situ generation of silver nanoparticles

Messori M.;
2018

Abstract

The present study demonstrates the feasibility of stereolithographic 3D printing of composite objects based on acrylic photocurable formulations, containing in situ generated silver nanoparticles (AgNPs). The laser radiation of a commercial stereolithography printer was used to both selectively cure, layer by layer, the acrylic resin and to reduce a silver salt to AgNPs. The presence of the filler causes an increase in the physical and mechanical properties of the samples that become significantly stiffer and stronger than the pristine matrix.
9th International Conference on Times of Polymers and Composites: From Aerospace to Nanotechnology
ita
2018
1981
020065
Taormina, G.; Sciancalpore, C.; Messori, M.; Bondioli, F.
Advanced resins for stereolithography: In situ generation of silver nanoparticles / Taormina, G.; Sciancalpore, C.; Messori, M.; Bondioli, F.. - 1981:(2018), p. 020065. ((Intervento presentato al convegno 9th International Conference on Times of Polymers and Composites: From Aerospace to Nanotechnology tenutosi a ita nel 2018 [10.1063/1.5045927].
File in questo prodotto:
File Dimensione Formato  
taormina2018.pdf

non disponibili

Tipologia: Versione dell'editore (versione pubblicata)
Dimensione 240.85 kB
Formato Adobe PDF
240.85 kB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

Caricamento pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/1228834
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 4
  • ???jsp.display-item.citation.isi??? 3
social impact