In the present paper the effects of rack manufacturing errors on the meshing of crossed helical rack and pinion are analyzed. The study is performed using multibody simulations that include the effects of the forces acting at the gear mesh to determine the influence of rack geometrical errors on operating center distance; results are in good agreement with a simplified analytical formulation.
Effects of gear manufacturing errors on rack and pinion steering meshing / Marano, D.; Piantoni, A.; Tabaglio, L.; Lucchi, M.; Barbieri, M.; Pellicano, F.. - (2017). (Intervento presentato al convegno 1st World Congress on Condition Monitoring 2017, WCCM 2017 tenutosi a ILEC Conference Centre, gbr nel 2017).
Effects of gear manufacturing errors on rack and pinion steering meshing
Barbieri M.;Pellicano F.
2017
Abstract
In the present paper the effects of rack manufacturing errors on the meshing of crossed helical rack and pinion are analyzed. The study is performed using multibody simulations that include the effects of the forces acting at the gear mesh to determine the influence of rack geometrical errors on operating center distance; results are in good agreement with a simplified analytical formulation.
| File | Dimensione | Formato | |
|---|---|---|---|
|
Effectsofgearmanufacturingerrorsonstabilityofrackandpinionsteeringgearmesh_Paperrev1.pdf
Accesso riservato
Tipologia:
Versione pubblicata dall'editore
Dimensione
703.59 kB
Formato
Adobe PDF
|
703.59 kB | Adobe PDF | Visualizza/Apri Richiedi una copia |
Pubblicazioni consigliate
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris
