This paper presents a storage system integration on the photovoltaic module side of a traditional grid-connected PV plant. The proposed retrofit application is based on a wide voltage range Dual Active Bridge topology, used as bidirectional DC/DC converter. Wide voltage operation capability at PV side is required to allow the integration of the retrofit storage system on a broader range of existing PV plants, characterized by different PV string operating voltage and commercial grid-connected inverters. Dual Active Bridge topology was chosen as a galvanically-insulated bidirectional single stage conversion stage to interface storage batteries to the PV side of the existing photovoltaic plant. The storage battery is charged during the overproduction of the PV plant and the storage system sustains the end-user domestic loads when solar irradiation is insufficient. The proper operation of the commercial inverter, the design and control strategy of the whole system showed the effectiveness of the proposed solution. A full-size 3.2kW converter prototype was manufactured and experimental validation was carried out.
Wide Voltage Range Dual Active Bridge PV Retrofit Storage System / Fornari, R.; Immovilli, F.; Lorenzani, E.. - 2019-:(2019), pp. 2524-2531. (Intervento presentato al convegno 45th Annual Conference of the IEEE Industrial Electronics Society, IECON 2019 tenutosi a Lisbon Congress Center, prt nel 2019) [10.1109/IECON.2019.8926933].
Wide Voltage Range Dual Active Bridge PV Retrofit Storage System
Fornari R.;Immovilli F.;Lorenzani E.
2019
Abstract
This paper presents a storage system integration on the photovoltaic module side of a traditional grid-connected PV plant. The proposed retrofit application is based on a wide voltage range Dual Active Bridge topology, used as bidirectional DC/DC converter. Wide voltage operation capability at PV side is required to allow the integration of the retrofit storage system on a broader range of existing PV plants, characterized by different PV string operating voltage and commercial grid-connected inverters. Dual Active Bridge topology was chosen as a galvanically-insulated bidirectional single stage conversion stage to interface storage batteries to the PV side of the existing photovoltaic plant. The storage battery is charged during the overproduction of the PV plant and the storage system sustains the end-user domestic loads when solar irradiation is insufficient. The proper operation of the commercial inverter, the design and control strategy of the whole system showed the effectiveness of the proposed solution. A full-size 3.2kW converter prototype was manufactured and experimental validation was carried out.
Pubblicazioni consigliate
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris
