In this work, an analysis of the tribological performance of laser-induced periodic surface structures (LIPSS) treated X5CrNi1810 stainless steel was conducted. The approach followed by authors was to generate LIPSS-patterned circular tracks, composed of radial straight grooves with uniform angular periodicity. This permitted to measure the tribological properties in a pin-on-flat configuration, keeping fixed the orientation between the grooves and the sliding direction. A Stribeck curve was measured, as well as the consequent wear. A deep analysis of the sub-surface conditions after LIPSS generation was moreover performed using Focused Ion Beam (FIB) cross-section.
Tribological Properties of High-Speed Uniform Femtosecond Laser Patterning on Stainless Steel / Gnilitskyi, Iaroslav; Rota, Alberto; Gualtieri, Enrico; Valeri, Sergio; Orazi, Leonardo. - In: LUBRICANTS. - ISSN 2075-4442. - 7:10(2019), pp. 83-91. [10.3390/lubricants7100083]
Tribological Properties of High-Speed Uniform Femtosecond Laser Patterning on Stainless Steel
Gnilitskyi, Iaroslav;Rota, Alberto;Gualtieri, Enrico;Valeri, Sergio;Orazi, Leonardo
2019
Abstract
In this work, an analysis of the tribological performance of laser-induced periodic surface structures (LIPSS) treated X5CrNi1810 stainless steel was conducted. The approach followed by authors was to generate LIPSS-patterned circular tracks, composed of radial straight grooves with uniform angular periodicity. This permitted to measure the tribological properties in a pin-on-flat configuration, keeping fixed the orientation between the grooves and the sliding direction. A Stribeck curve was measured, as well as the consequent wear. A deep analysis of the sub-surface conditions after LIPSS generation was moreover performed using Focused Ion Beam (FIB) cross-section.File | Dimensione | Formato | |
---|---|---|---|
lubricants-07-00083-v3.pdf
Open access
Tipologia:
Versione pubblicata dall'editore
Dimensione
2.47 MB
Formato
Adobe PDF
|
2.47 MB | Adobe PDF | Visualizza/Apri |
Pubblicazioni consigliate
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris