Effects of nanofluid contaminated coolant on the performance of a spark ignition engine

In this work, the effects of alumina nanoparticle contaminated coolant on the performance of a small Spark Ignition engine are investigated by 1D and 3D models. An analysis regarding the alumina nanofluid properties is carried out, and, in particular, a reliable correlation for the thermal conductivity ratio between nanofluid and base coolants is selected. Firstly, a single-cylinder 3D-CFD model of a similar engine cooling system is developed in Star-CCM+ and it is employed to derive the relative increase of the convective in-cylinder heat transfer coefficient. The latter takes into account the geometrical effects of the cooling system, the flow conditions and the nanofluid characteristics. Secondly, a 1D engine model is developed and validated against the available experimental findings with standard coolant fluid. The model is then employed, in a predictive way, to perform full and part load analyses, where the 3D-predicted heat transfer coefficient of the nanofluid contaminated coolant is imposed as an input. The outcomes reveal the potential of the considered nanofluid to achieve fuel consumption improvements (up to about 5.4%) at full load, mainly due to decreased knock tendency and reduced mixture over-fuelling, while minor fuel consumption penalizations (about 1.0 %) are observed at low loads.