The paper deals with the experimental measurement of the shear strength in hybrid interfaces, press fitted and bonded with anaerobic adhesives. The aim is to validate and improve the applicability of a constitutive model, which describes the interface behavior up to complete failure, by combining a cohesive law with a pure friction law. This paper presents an extensive experimental test plan, which deeply investigates the shear strength of two strong anaerobic adhesives, over four nominal contact pressure levels. The tests involve cylindrical specimens, butt bonded and pressure reinforced over an annular surface, and seven replications, giving 56 tests. The experimental torque-rotation curves up to complete failure highlight a similar response between the two adhesives, and confirm that the strain energy up to complete failure sums up a cohesive term and a pure friction term. In addition, the main parameters of the model linearly depend from contact pressure through simple relationships.

Experimental validation of a simple shear strength model for hybrid friction-bonded interfaces / Ragni, M.; Castagnetti, D.; Dragoni, E.. - In: INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES. - ISSN 0143-7496. - 83:(2018), pp. 130-136. [10.1016/j.ijadhadh.2018.02.026]

Experimental validation of a simple shear strength model for hybrid friction-bonded interfaces

M. Ragni;D. Castagnetti;E. Dragoni
2018

Abstract

The paper deals with the experimental measurement of the shear strength in hybrid interfaces, press fitted and bonded with anaerobic adhesives. The aim is to validate and improve the applicability of a constitutive model, which describes the interface behavior up to complete failure, by combining a cohesive law with a pure friction law. This paper presents an extensive experimental test plan, which deeply investigates the shear strength of two strong anaerobic adhesives, over four nominal contact pressure levels. The tests involve cylindrical specimens, butt bonded and pressure reinforced over an annular surface, and seven replications, giving 56 tests. The experimental torque-rotation curves up to complete failure highlight a similar response between the two adhesives, and confirm that the strain energy up to complete failure sums up a cohesive term and a pure friction term. In addition, the main parameters of the model linearly depend from contact pressure through simple relationships.
2018
1-mar-2018
83
130
136
Experimental validation of a simple shear strength model for hybrid friction-bonded interfaces / Ragni, M.; Castagnetti, D.; Dragoni, E.. - In: INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES. - ISSN 0143-7496. - 83:(2018), pp. 130-136. [10.1016/j.ijadhadh.2018.02.026]
Ragni, M.; Castagnetti, D.; Dragoni, E.
File in questo prodotto:
File Dimensione Formato  
Experimental validation of a simple shear strength model for hybrid friction-bonded interfaces.pdf

Accesso riservato

Tipologia: Versione dell'autore revisionata e accettata per la pubblicazione
Dimensione 1.59 MB
Formato Adobe PDF
1.59 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/1156051
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 9
  • ???jsp.display-item.citation.isi??? 8
social impact