Extrusion process presents two types of welding mechanism inside the die: seam and charge weld. The first type is unavoidable in the production of hollow profiles while the second is generated during billet to billet transition. Differently from seam weld, charge weld represent an unacceptable defect that require profile discard. Nevertheless charge weld extent and location on extrudates is not evident, thus requiring scrap definition by means of time-consuming trials or to repetitive tests on each batch. In the present paper an industrial four holes porthole die for hollow profiles production was investigated during billet to billet transition. Extrusion of four billet was performed under strict parameter control. The profiles were microscopically analyzed in order to determine weld evolution: in particular start and end points of weld for each profile were determined.
ANALYSIS OF CHARGE WELD EVOLUTION FOR A MULTI-HOLES EXTRUSION DIE / Segatori, Antonio; Reggiani, Barbara; Donati, Lorenzo; Tomesani, Luca. - 2:(2011), pp. 263-271. (Intervento presentato al convegno TMS 2011 140th Annual Meeting and Exhibition. tenutosi a San Diego, CA, USA. nel 27 February- 3 March 2011.).
ANALYSIS OF CHARGE WELD EVOLUTION FOR A MULTI-HOLES EXTRUSION DIE
Barbara Reggiani;
2011
Abstract
Extrusion process presents two types of welding mechanism inside the die: seam and charge weld. The first type is unavoidable in the production of hollow profiles while the second is generated during billet to billet transition. Differently from seam weld, charge weld represent an unacceptable defect that require profile discard. Nevertheless charge weld extent and location on extrudates is not evident, thus requiring scrap definition by means of time-consuming trials or to repetitive tests on each batch. In the present paper an industrial four holes porthole die for hollow profiles production was investigated during billet to billet transition. Extrusion of four billet was performed under strict parameter control. The profiles were microscopically analyzed in order to determine weld evolution: in particular start and end points of weld for each profile were determined.
| File | Dimensione | Formato | |
|---|---|---|---|
|
TMS.pdf
Accesso riservato
Tipologia:
Altro
Dimensione
7.65 MB
Formato
Adobe PDF
|
7.65 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
Pubblicazioni consigliate
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris
