To improve reliability some systems adopt double redundancy; however, some failure conditions may prevent the normal operation of the machine or the machine to reach a safe state. The method proposed in this paper allows the normal operation of the system even in a fault condition of the control unit. The signals resulting from the parallel execution of code are modulated to a higher frequency and decoupled from each control stage using two capacitors; the information is then demodulated to obtain the control signal, either in the case of one or two branches working in the control unit. © 2014 WIT Press.

Fault tolerant PWM generation with doubleredundant logic / Troni, F.; Concari, C.; Toscani, A.; Buticchi, G.; Franceschini, G.. - 87:(2014), pp. 495-502. (Intervento presentato al convegno 2013 3rd International Conference on Advanced Materials and Information Technology Processing, AMITP 2013 tenutosi a Los Angeles, CA; United States nel October 2013 through 2 October 2013) [10.2495/AMITP20130581].

Fault tolerant PWM generation with doubleredundant logic

Franceschini, G.
2014

Abstract

To improve reliability some systems adopt double redundancy; however, some failure conditions may prevent the normal operation of the machine or the machine to reach a safe state. The method proposed in this paper allows the normal operation of the system even in a fault condition of the control unit. The signals resulting from the parallel execution of code are modulated to a higher frequency and decoupled from each control stage using two capacitors; the information is then demodulated to obtain the control signal, either in the case of one or two branches working in the control unit. © 2014 WIT Press.
2014
2013 3rd International Conference on Advanced Materials and Information Technology Processing, AMITP 2013
Los Angeles, CA; United States
October 2013 through 2 October 2013
87
495
502
Troni, F.; Concari, C.; Toscani, A.; Buticchi, G.; Franceschini, G.
Fault tolerant PWM generation with doubleredundant logic / Troni, F.; Concari, C.; Toscani, A.; Buticchi, G.; Franceschini, G.. - 87:(2014), pp. 495-502. (Intervento presentato al convegno 2013 3rd International Conference on Advanced Materials and Information Technology Processing, AMITP 2013 tenutosi a Los Angeles, CA; United States nel October 2013 through 2 October 2013) [10.2495/AMITP20130581].
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/1150693
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 2
  • ???jsp.display-item.citation.isi??? ND
social impact