CRIALESI ESPOSITO, Marco
CRIALESI ESPOSITO, Marco
Dipartimento di Ingegneria "Enzo Ferrari"
A criterion for when an emulsion drop undergoing turbulent deformation has reached a critically deformed state
2022 Hakansson, A; Crialesi-Esposito, M; Nilsson, L; Brandt, L
A Direct Numerical Simulation Investigation of the One-Phase Flow in a Simplified Emulsification Device
2022 Olad, Peyman; CRIALESI ESPOSITO, Marco; Brandt, Luca; Innings, Fredrik; Hakansson, Andreas
A mass-momentum consistent, Volume-of-Fluid method for incompressible flow on staggered grids
2021 Arrufat, T.; Crialesi-Esposito, M.; Fuster, D.; Ling, Y.; Malan, L.; Pal, S.; Scardovelli, R.; Tryggvason, G.; Zaleski, S.
Analysis on the effects of turbulent inflow conditions on spray primary atomization in the near-field by direct numerical simulation
2018 Salvador, F. J.; Ruiz, S.; Crialesi-Esposito, M.; Blanquer, I.
Comparative study of the internal flow in diesel injection nozzles at cavitating conditions at different needle lifts with steady and transient simulations approaches
2018 Salvador, Fj; De la Morena, J; Crialesi-Esposito, M; Martinez-Lopez, J
Comparison of turbulent drop breakup in an emulsification device and homogeneous isotropic turbulence: Insights from numerical experiments
2023 Olad, P; Innings, F; Crialesi-Esposito, M; Brandt, L; Hakansson, A
Determination of critical operating and geometrical parameters in diesel injectors through one dimensional modelling, design of experiments and an analysis of variance
2018 Salvador, Fj; Carreres, M; Crialesi-Esposito, M; Plazas, Ah
Droplet dynamics in homogeneous and isotropic turbulence
2023 Chibbaro, Sergio; CRIALESI ESPOSITO, Marco; Brandt, Luca
Effects of isotropic and anisotropic turbulent structures over spray atomization in the near field
2022 CRIALESI ESPOSITO, Marco; Gonzalez-Montero, L. A.; Salvador, F. J.
Effects of Rayleigh and Weber numbers on two-layer turbulent Rayleigh–Bénard convection
2024 Demou, Andreas D.; Scapin, Nicolò; Crialesi-Esposito, Marco; Costa, Pedro; Spiga, Filippo; Brandt, Luca
Experimental assessment of the fuel heating and the validity of the assumption of adiabatic flow through the internal orifices of a diesel injector
2017 Salvador, F. J.; Gimeno, J.; Carreres, M.; Crialesi-Esposito, M.
Experimental investigation of the effect of orifices inclination angle in multihole diesel injector nozzles. Part 1-Hydraulic performance
2018 Salvador, Fj; Lopez, Jj; De la Morena, J; Crialesi-Esposito, M
FluTAS: A GPU-accelerated finite difference code for multiphase flows
2023 CRIALESI ESPOSITO, Marco; Nicolò, Scapin; Demou, Andreas D.; Marco Edoardo Rosti, ; Pedro, Costa; Filippo, Spiga; Luca, Brandt
Fuel temperature influence on the performance of a last generation common-rail diesel ballistic injector. Part I: Experimental mass flow rate measurements and discussion
2016 Salvador, Fj; Gimeno, J; Carreres, M; Crialesi-Esposito, M
How small droplets form in turbulent multiphase flows
2024 Crialesi-Esposito, M.; Boffetta, G.; Brandt, L.; Chibbaro, S.; Musacchio, S.
Intermittency in turbulent emulsions
2023 Crialesi-Esposito, M.; Boffetta, G.; Brandt, L.; Chibbaro, S.; Musacchio, S.
Modulation of homogeneous and isotropic turbulence in emulsions
2022 CRIALESI ESPOSITO, Marco; Edoardo Rosti, Marco; Chibbaro, Sergio; Brandt, Luca
Nonlinear model predictive control of an Organic Rankine Cycle for exhaust waste heat recovery in automotive engines
2015 Esposito, M. C.; Pompini, N.; Gambarotta, A.; Chandrasekaran, V.; Zhou, J.; Canova, M.
PArallel, Robust, Interface Simulator (PARIS)
2021 Aniszewski, W.; Arrufat, T.; Crialesi-Esposito, M.; Dabiri, S.; Fuster, D.; Ling, Y.; Lu, J.; Malan, L.; Pal, S.; Scardovelli, R.; Tryggvason, G.; Yecko, P.; Zaleski, S.
Study of turbulence in atomizing liquid jets
2020 Torregrosa, Antonio J.; Raúl, Payri; Javier Salvador, F.; CRIALESI ESPOSITO, Marco