ItalianoFABBRI, Paola
Dettaglio
FABBRI, Paola
Dipartimento di Ingegneria "Enzo Ferrari"
Pubblicazioni
Risultati 1 - 20 di 60 (tempo di esecuzione: 0.001 secondi).
| Titolo | Data di pubblicazione | Autore(i) | |
|---|---|---|---|
| 1 | 45S5 Bioglass®-derived scaffolds coated with organic–inorganic hybrids containing graphene | 2013 | Fabbri, Paola; Luca, Valentini; Jasmin, Hum; Rainer, Detsch; Aldo R., Boccaccini |
| 2 | Anti-scratch and adhesion properties of photo-curable polymer/clay nanocomposite coatings based on methacrylate monomers | 2011 | S., Mohamadpour; B., Pourabbas; Fabbri, Paola |
| 3 | Bentonite-based organoclays as innovative flame retardants agents for SBS copolymer | 2008 | M., Comes Franchini; FABBRI, Paola; A., Frache; ORI, GUIDO; MESSORI, Massimo; SILIGARDI, Cristina; A., Ricci |
| 4 | Cohesive and adhesive properties of polycaprolactone/silica hybrid coatings on poly(methyl methacrylate) substrates | 2006 | Fabbri, Paola; B., Singh; Y., Leterrier; J. A. E., Manson; Messori, Massimo; Pilati, Francesco |
| 5 | Construction and evaluation of a disposable pH sensor based on a large core plastic optical fiber | 2011 | Rovati, Luigi; Fabbri, Paola; Luca, Ferrari; Francesco, Pilati |
| 6 | Continuous haematic pH monitoring in extracorporeal circulation using a disposable florescence sensing element. | 2013 | Ferrari, L; Rovati, Luigi; Fabbri, Paola; Pilati, F. |
| 7 | Design of surface properties of PET films: effect of fluorinated block copolymers | 2007 | PILATI, Francesco; M., Montecchi; FABBRI, Paola; A., Synytska; MESSORI, Massimo; M., Toselli; K., Grundke; D., Pospiech |
| 8 | Development of a low-cost pH sensor based on plastic optical fibers | 2009 | Rovati, Luigi; Fabbri, Paola; F., Pilati |
| 9 | Disposable Fluorescence Optical pH Sensor for Near Neutral Solutions | 2013 | Luca, Ferrari; Rovati, Luigi; Fabbri, Paola; Pilati, Francesco |
| 10 | Electrical Behavior of PET Films Coated with Nanostructured Organic–Inorganic Hybrids | 2006 | A., Saccani; M., Toselli; Messori, Massimo; Fabbri, Paola; Pilati, Francesco |
| 11 | Engineering plastics | 2007 | Pilati, Francesco; Messori, Massimo; Fabbri, Paola; Toselli, M. |
| 12 | Enhancement of Photoprotection and Mechanical Properties of Polymers by Deposition of Thin Coatings | 2009 | A., Rivaton; J. L., Gardette; S., Morlat Therias; B., Mailhot; E., Tomasella; O., Awitor; K., Komvopoulos; Fabbri, Paola |
| 13 | Enhancing the scratch resistance of polycarbonate with poly(ethylene oxide)-silica hybrid coatings | 2009 | Fabbri, Paola; Messori, Massimo; M., Toselli; Veronesi, Paolo; J., Rocha; Pilati, Francesco |
| 14 | Epoxy resins modified with perfluoropolyethers: toughening and reduction of liquid absorption | 2008 | Messori, Massimo; Pilati, Francesco; Fabbri, Paola; M., Toselli |
| 15 | Functionally modified core-shell silica nanoparticles by one-pot synthesis | 2008 | M., Marini; B., Pourabbas; Pilati, Francesco; Fabbri, Paola |
| 16 | Haematic pH sensor for extracorporeal circulation | 2012 | Ferrari, Luca; Fabbri, Paola; Rovati, Luigi; Pilati, Francesco |
| 17 | High-density polyethylene reinforced with titania nanoparticles | 2008 | Bondioli, Federica; Dorigato, A; Fabbri, Paola; Messori, Massimo; Pegoretti, A. |
| 18 | Highly porous polycaprolactone-45S5 bioglass® scaffolds for bone tissue engineering | 2010 | Fabbri, Paola; Cannillo, Valeria; Sola, Antonella; A., Dorigato; F., Chiellini |
| 19 | Hydrophobic and Oleophobic Coatings Based on Perfluoropolyether/Silica Hybrids by the Sol-Gel Method | 2008 | Fabbri, Paola; Messori, Massimo; Pilati, Francesco; R., Taurino; C., Tonelli; M., Toselli |
| 20 | Improvement of the surface properties of polycarbonate by organic-inorganic hybrid coatings | 2008 | Fabbri, Paola; Leonelli, Cristina; Messori, Massimo; Pilati, Francesco; Toselli, M; Veronesi, Paolo; MORLAT THERIAS, S; Rivaton, A; Gardette, J. L. |
Copyright © 2021