The aim of this work concern the analysis of the effectiveness of Reverse Engineering methods (scanning and processing data) for the purpose of evaluating and controlling the geometrical characteristics and surface quality of automotive body components. Evaluation of the surface characteristics of the part has been conducted utilizing reverse engineering instead of the traditional point-by-point measurement techniques. In particular, the study of the models focused on the behavior of the curvature, obtained on sections of the surfaces. The scatter present in data obtained from different scannings and other kinds of imprecision arising from the processing techniques employed create many problems in the assessment of surface quality. This study presents an original methodology for a benchmark test between different scanning methods, the benchmark is done by means of some aluminum alloy test plates with known, established surface features. By the acquisition of the test plates we could evaluate the different capability in revealing local curvature and other types of defects.

Application Of Reverse Engineering and Analysis Techniques for Surface Quality Control of Automotive Components / Orazi, Leonardo; G., Tani. - STAMPA. - 1:(2003), pp. 185-186. ((Intervento presentato al convegno 6th AITeM Conference tenutosi a Gaeta nel 8-10, September, 2003.

Application Of Reverse Engineering and Analysis Techniques for Surface Quality Control of Automotive Components

ORAZI, Leonardo;
2003-01-01

Abstract

The aim of this work concern the analysis of the effectiveness of Reverse Engineering methods (scanning and processing data) for the purpose of evaluating and controlling the geometrical characteristics and surface quality of automotive body components. Evaluation of the surface characteristics of the part has been conducted utilizing reverse engineering instead of the traditional point-by-point measurement techniques. In particular, the study of the models focused on the behavior of the curvature, obtained on sections of the surfaces. The scatter present in data obtained from different scannings and other kinds of imprecision arising from the processing techniques employed create many problems in the assessment of surface quality. This study presents an original methodology for a benchmark test between different scanning methods, the benchmark is done by means of some aluminum alloy test plates with known, established surface features. By the acquisition of the test plates we could evaluate the different capability in revealing local curvature and other types of defects.
6th AITeM Conference
Gaeta
8-10, September, 2003
Orazi, Leonardo; G., Tani
Application Of Reverse Engineering and Analysis Techniques for Surface Quality Control of Automotive Components / Orazi, Leonardo; G., Tani. - STAMPA. - 1:(2003), pp. 185-186. ((Intervento presentato al convegno 6th AITeM Conference tenutosi a Gaeta nel 8-10, September, 2003.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Caricamento pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/616055
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact