PELACCIA, RICCARDO

PELACCIA, RICCARDO  

Dipartimento di Scienze e Metodi dell'Ingegneria  

Mostra records
Risultati 1 - 20 di 41 (tempo di esecuzione: 0.111 secondi).
Titolo Data di pubblicazione Autore(i) File
A Homogeneous Flow Model for nitrogen cooling in the aluminum-alloy extrusion process 1-gen-2022 Pelaccia, Riccardo; Santangelo, Paolo Emilio
A NOVEL 3D PRINTED COOLING INSERT FOR EXTRUSION DIES 1-gen-2019 Valli, Giuseppe; Reggiani, Barbara; Todaro, Ivan; Pelaccia, Riccardo; Squatrito, Rosario; Pinter, Tommaso; Mainetti, Enea; Rami, Yoram; Donati, Lorenzo; Tomesani, Luca
A novel design concept of the extrusion dies 1-gen-2019 Reggiani, Barbara; Donati, Lorenzo; Tomesani, Luca; Pelaccia, Riccardo
A novel SLM H13 cooling insert for extrusion dies: experimental and numerical investigations 1-gen-2018 Pelaccia, Riccardo; Reggiani, Barbara; Donati, Lorenzo
Ablation rate assessment of GHz femtosecond laser in burst mode through fast numerical simulation 1-gen-2024 Mazzonetto, Manuel; Pelaccia, Riccardo; Greborio, Alessandro; Conzatti, Riccardo; Siciliani, Vincenzina; Oubellaouch, Keltoum; Ricucci, Antonia; Orazi, Leonardo
Adaptive Optics for Laser Beam Shaping 1-gen-2023 Siciliani, V.; Orazi, L.; Pelaccia, R.; Mazzonetto, M.; Oubellaouch, K.; Reggiani, B.
Adaptive optics solution to improve laser-induced periodic surface structuring (LIPSS) 1-gen-2024 Siciliani, Vincenzina; Zaniboni, Giulia; Pelaccia, Riccardo; Mazzonetto, Manuel; Oubellaouch, Keltoum; Bonora, Stefano; Orazi, Leonardo
Adaptive Optics to enhance LIPSS surface texturing 1-gen-2024 Siciliani, Vincenzina; Zaniboni, Giulia; Pelaccia, Riccardo; Mazzonetto, Manuel; Bonora, Stefano; Orazi, Leonardo
Advanced modeling of die cooling with liquid nitrogen 1-gen-2019 Pelaccia, Riccardo; Reggiani, Barbara; Donati, Lorenzo; Tomesani, Luca
Advanced simulation of nitrogen cooling in extrusion of light alloys 1-gen-2023 Santangelo, Paolo Emilio; Pelaccia, Riccardo; Rinaldi, Gabriele; Reggiani, Barbara; Orazi, Leonardo
Advancements in extrusion and drawing: a review of the contributes by the ESAFORM community 1-gen-2022 Donati, L.; Reggiani, B.; Pelaccia, R.; Negozio, M.; Di Donato, S.
Analysis and optimization of cooling channels performances for industrial extrusion dies 1-gen-2021 Pelaccia, Riccardo; Negozio, Marco; Reggiani, Barbara; Donati, Lorenzo; Tomesani, Luca
Assessment of fiber orientation models predictability by comparison with X-ray µCT data in injection-molded short glass fiber-reinforced polyamide 1-gen-2024 Oubellaouch, Keltoum; Pelaccia, Riccardo; Bonato, Nicolò; Bettoni, Nicola; Carmignato, Simone; Orazi, Leonardo; Donati, Lorenzo; Reggiani, Barbara
Assessment of the Optimization Strategy for Nitrogen Cooling Channel Design in Extrusion Dies 1-gen-2022 Pelaccia, Riccardo; Negozio, Marco; Reggiani, Barbara; Donati, Lorenzo
Back.end and front-end scrap in direct extrusion: an estimation by means of finite element analysis 1-gen-2019 Tommaso, Pinter; Ezio, Sicignano; Pelaccia, Riccardo; Reggiani, Barbara; Lorenzo, Donati
Development of an automatic procedure to texture cutting tools with a complex geometry 1-gen-2023 Mazzonetto, Manuel; Siciliani, Vincenzina; Orazi, Leonardo; Pelaccia, Riccardo; Oubellaouch, Keltoum; Reggiani, Barbara
Effects of Surface Treatments on the Fatigue Response of High Strength Fasteners 1-gen-2019 Reggiani, Barbara; Olmi, Giorgio; Orazi, Leonardo; Tomesani, Luca; Fini, Stefano; Barozzi, Lorenzo; Pelaccia, Riccardo; Bandini, Michele
Effects of Ti6Al4V mechanical and thermal surface modification on the adhesion of a chitosan-bioactive glass coating 1-gen-2023 Sanguedolce, M; Rotella, G; Curcio, F; Pelaccia, R; Siciliani, V; Cassano, R; Orazi, L; Filice, L
Efficiency of conformal cooling channels inserts for extrusion dies 1-gen-2020 Pelaccia, R.; Negozio, M.; Donati, L.; Reggiani, B.; Tomesani, L.
Experimental analysis and modeling of the recrystallization behaviour of a AA6060 extruded profile 1-gen-2023 Negozio, M.; Donati, L.; Pelaccia, R.; Reggiani, B.; Di Donato, S.