This paper proposes a fast and on-site method for the dynamic identification of industrial robots from low-sampled position and torque data. Owing to the basic architecture of the employed controller, only trapezoidal-velocity trajectories can be enforced for identification purposes. Differently from previous literature, where this kind of trajectories were performed with limited joint velocities and range of motions, the procedure proposed hereafter is characterized by fast movements performed on wide angular ranges. Furthermore, in order to identify the influence of friction without deriving complex friction models, a novel method is outlined that decouples frictional torques from gravitational, centrifugal and inertial ones. Finally, although multiple experiments of different kinds have been performed, inertial parameters are determined in one singular step, thus avoiding possible error increase due to sequential identification algorithms.

Dynamic identification of industrial robots from low-sampled data / Oliva, Enrico; Berselli, Giovanni; Pini, Fabio. - STAMPA. - 328:(2013), pp. 644-650. (Intervento presentato al convegno 2013 3rd International Conference on Mechanical Science and Engineering, ICMSE 2013 tenutosi a Hong Kong nel 1-3 Marzo) [10.4028/www.scientific.net/AMM.328.644].

Dynamic identification of industrial robots from low-sampled data

OLIVA, ENRICO;BERSELLI, Giovanni;PINI, Fabio
2013

Abstract

This paper proposes a fast and on-site method for the dynamic identification of industrial robots from low-sampled position and torque data. Owing to the basic architecture of the employed controller, only trapezoidal-velocity trajectories can be enforced for identification purposes. Differently from previous literature, where this kind of trajectories were performed with limited joint velocities and range of motions, the procedure proposed hereafter is characterized by fast movements performed on wide angular ranges. Furthermore, in order to identify the influence of friction without deriving complex friction models, a novel method is outlined that decouples frictional torques from gravitational, centrifugal and inertial ones. Finally, although multiple experiments of different kinds have been performed, inertial parameters are determined in one singular step, thus avoiding possible error increase due to sequential identification algorithms.
2013
2013 3rd International Conference on Mechanical Science and Engineering, ICMSE 2013
Hong Kong
1-3 Marzo
328
644
650
Oliva, Enrico; Berselli, Giovanni; Pini, Fabio
Dynamic identification of industrial robots from low-sampled data / Oliva, Enrico; Berselli, Giovanni; Pini, Fabio. - STAMPA. - 328:(2013), pp. 644-650. (Intervento presentato al convegno 2013 3rd International Conference on Mechanical Science and Engineering, ICMSE 2013 tenutosi a Hong Kong nel 1-3 Marzo) [10.4028/www.scientific.net/AMM.328.644].
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/983353
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 6
  • ???jsp.display-item.citation.isi??? ND
social impact