The present work is aimed at analyzing the cooling of hot solid surfaces induced by liquid sprays. In particular, the study is focused on the measurement of the transient contact temperature between impinging droplets and hot solid surfaces.An experimental apparatus was built and setup in order to approach the non-trivial problem of the non-intrusive measurement of a solid-liquid interface temperature after droplet impingement. The solid-liquid interface temperature was monitored from below through a transparent-to-infrared, zero-emissivity material. That material had been coated with a very thin layer of high-emissivity, opaque paint on its upper side, so that it could effectively respond to the infrared camera located below.The experiences collected up to now are described, with particular regard to the approaches used to coat the transparent solid. The results of a few preliminary tests are also reported here, together with considerations about the effectiveness of the proposed method and about the improvements that are currently being implemented to get new and more accurate interface temperature measurements. The obtained results are comparable with the predictions of the theoretical contact temperature equation, which is available in literature.

Dropwise cooling: experimental tests on infrared-transparent media / L., Tarozzi; Muscio, Alberto; Tartarini, Paolo. - STAMPA. - (2005), pp. 269-274. (Intervento presentato al convegno XXIII Congresso Nazionale sulla Trasmissione del Calore tenutosi a Parma (Italia) nel 20-22 Giugno 2005).

Dropwise cooling: experimental tests on infrared-transparent media

MUSCIO, Alberto;TARTARINI, Paolo
2005

Abstract

The present work is aimed at analyzing the cooling of hot solid surfaces induced by liquid sprays. In particular, the study is focused on the measurement of the transient contact temperature between impinging droplets and hot solid surfaces.An experimental apparatus was built and setup in order to approach the non-trivial problem of the non-intrusive measurement of a solid-liquid interface temperature after droplet impingement. The solid-liquid interface temperature was monitored from below through a transparent-to-infrared, zero-emissivity material. That material had been coated with a very thin layer of high-emissivity, opaque paint on its upper side, so that it could effectively respond to the infrared camera located below.The experiences collected up to now are described, with particular regard to the approaches used to coat the transparent solid. The results of a few preliminary tests are also reported here, together with considerations about the effectiveness of the proposed method and about the improvements that are currently being implemented to get new and more accurate interface temperature measurements. The obtained results are comparable with the predictions of the theoretical contact temperature equation, which is available in literature.
2005
XXIII Congresso Nazionale sulla Trasmissione del Calore
Parma (Italia)
20-22 Giugno 2005
269
274
L., Tarozzi; Muscio, Alberto; Tartarini, Paolo
Dropwise cooling: experimental tests on infrared-transparent media / L., Tarozzi; Muscio, Alberto; Tartarini, Paolo. - STAMPA. - (2005), pp. 269-274. (Intervento presentato al convegno XXIII Congresso Nazionale sulla Trasmissione del Calore tenutosi a Parma (Italia) nel 20-22 Giugno 2005).
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/619056
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact