In this paper, a numerical code is presented, which simulates the evaporation of water droplets on hot solid surfaces. At the present stage of development, single-phase evaporation is addressed. The three-dimensional energy diffusion equation is employed to model the transient within both the droplets and the solid substrate and is discretized using the finite volume method. Infrared thermography is used to measure the transient contact temperature between impinging droplets and hot solid surfaces in order to validate the code by comparison with experimental data. Droplets are released onto the heated solid surface of a barium fluoride (BaF2) disk, which has high transmittance (about 90%) in the 8-12 um range (typical of longwave infrared cameras). The interface temperature is measured from below, through the solid material. Since the solid is IR-transparent, a black coating layer is used to allow radiative heating of the surface and provide a method to measure the liquid-solid interface temperature. The numerical predictions show very good agreement with the experimental data.

Dropwise cooling: a numerical simulation code and its validation by infrared thermography tests / Corticelli, Mauro Alessandro; Santangelo, Paolo Emilio; Tartarini, Paolo. - STAMPA. - (2008), pp. 329-334. (Intervento presentato al convegno XXVI Congresso Nazionale UIT sulla Trasmissione del Calore tenutosi a Palermo, Italia nel 23-25 Giugno 2008).

Dropwise cooling: a numerical simulation code and its validation by infrared thermography tests

Mauro Alessandro Corticelli;Paolo Emilio Santangelo;Paolo Tartarini
2008

Abstract

In this paper, a numerical code is presented, which simulates the evaporation of water droplets on hot solid surfaces. At the present stage of development, single-phase evaporation is addressed. The three-dimensional energy diffusion equation is employed to model the transient within both the droplets and the solid substrate and is discretized using the finite volume method. Infrared thermography is used to measure the transient contact temperature between impinging droplets and hot solid surfaces in order to validate the code by comparison with experimental data. Droplets are released onto the heated solid surface of a barium fluoride (BaF2) disk, which has high transmittance (about 90%) in the 8-12 um range (typical of longwave infrared cameras). The interface temperature is measured from below, through the solid material. Since the solid is IR-transparent, a black coating layer is used to allow radiative heating of the surface and provide a method to measure the liquid-solid interface temperature. The numerical predictions show very good agreement with the experimental data.
2008
XXVI Congresso Nazionale UIT sulla Trasmissione del Calore
Palermo, Italia
23-25 Giugno 2008
329
334
Corticelli, Mauro Alessandro; Santangelo, Paolo Emilio; Tartarini, Paolo
Dropwise cooling: a numerical simulation code and its validation by infrared thermography tests / Corticelli, Mauro Alessandro; Santangelo, Paolo Emilio; Tartarini, Paolo. - STAMPA. - (2008), pp. 329-334. (Intervento presentato al convegno XXVI Congresso Nazionale UIT sulla Trasmissione del Calore tenutosi a Palermo, Italia nel 23-25 Giugno 2008).
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/618420
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact