The contact problem between a split ring and a circular housing is mechanicallyexamined. This contact is revisited in terms of receding contact, the zones along which the ringbeds over the housing are investigated, and normalizing design parameters are evidenced. Thesplit ring is modelled in terms of a straight, purely flexural beam as well as of a curved, shearelasticbeam; for both models, analytical solutions are obtained. Various easy accessible designdiagrams, useful for estimating the maximum elastic stresses within the split ring and the axialinsertion force, have been prepared with the aid of these two beam models and using finiteelements. The mechanical response of the split ring when its angular width is appreciably lowerthan p is clarified.

Contact stresses within a split ring inserted into acircular housing / Strozzi, Antonio; Baldini, Andrea; Giacopini, Matteo; Rosi, Roberto; Bertocchi, Enrico. - In: JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN. - ISSN 0309-3247. - STAMPA. - 44:(2009), pp. 671-688. [10.1243/03093247JSA542]

Contact stresses within a split ring inserted into acircular housing

STROZZI, Antonio;BALDINI, Andrea;GIACOPINI, Matteo;ROSI, Roberto;BERTOCCHI, Enrico
2009

Abstract

The contact problem between a split ring and a circular housing is mechanicallyexamined. This contact is revisited in terms of receding contact, the zones along which the ringbeds over the housing are investigated, and normalizing design parameters are evidenced. Thesplit ring is modelled in terms of a straight, purely flexural beam as well as of a curved, shearelasticbeam; for both models, analytical solutions are obtained. Various easy accessible designdiagrams, useful for estimating the maximum elastic stresses within the split ring and the axialinsertion force, have been prepared with the aid of these two beam models and using finiteelements. The mechanical response of the split ring when its angular width is appreciably lowerthan p is clarified.
2009
44
671
688
Contact stresses within a split ring inserted into acircular housing / Strozzi, Antonio; Baldini, Andrea; Giacopini, Matteo; Rosi, Roberto; Bertocchi, Enrico. - In: JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN. - ISSN 0309-3247. - STAMPA. - 44:(2009), pp. 671-688. [10.1243/03093247JSA542]
Strozzi, Antonio; Baldini, Andrea; Giacopini, Matteo; Rosi, Roberto; Bertocchi, Enrico
File in questo prodotto:
File Dimensione Formato  
Strozzi_et_al_2009.pdf

Accesso riservato

Tipologia: Versione dell'autore revisionata e accettata per la pubblicazione
Dimensione 360.1 kB
Formato Adobe PDF
360.1 kB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/618381
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 8
  • ???jsp.display-item.citation.isi??? 6
social impact