The evaporative cooling of a sparse spray impacting on a hot solid is investigated to determine the limiting condition associated with the liquid flooding of the solid surface. The flooding condition is identified when the evaporation rate is insufficient to remove the amount of water being deposited on the surface. The flooding criterion is derived as a function of the initial single droplet volume prior to deposition, the Evaporation-Recovery Cycle (ERC) and the area of influence, which describes the region of the solid surface associated with a single droplet cooling effect. These last two quantities, the ERC and the area of influence, are evaluated by integrating previously obtained theoretical and experimental information with selected experimental data obtained in this study. The flooding criterion, while semi-empirical in its derivation, can be generalized to all non-porous solids under a variety of conditions. The spray is sparse and the water droplets are considered of uniform size. Extension to a spray with non-uniform droplet distribution is not considered here.

Flooding Criterion for Evaporative Cooling on Horizontal Semi-Infinite Solids / M., Lederer; M., di Marzo; Tartarini, Paolo. - In: INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY. - ISSN 0392-8764. - STAMPA. - 15:(1997), pp. 55-60.

Flooding Criterion for Evaporative Cooling on Horizontal Semi-Infinite Solids

TARTARINI, Paolo
1997

Abstract

The evaporative cooling of a sparse spray impacting on a hot solid is investigated to determine the limiting condition associated with the liquid flooding of the solid surface. The flooding condition is identified when the evaporation rate is insufficient to remove the amount of water being deposited on the surface. The flooding criterion is derived as a function of the initial single droplet volume prior to deposition, the Evaporation-Recovery Cycle (ERC) and the area of influence, which describes the region of the solid surface associated with a single droplet cooling effect. These last two quantities, the ERC and the area of influence, are evaluated by integrating previously obtained theoretical and experimental information with selected experimental data obtained in this study. The flooding criterion, while semi-empirical in its derivation, can be generalized to all non-porous solids under a variety of conditions. The spray is sparse and the water droplets are considered of uniform size. Extension to a spray with non-uniform droplet distribution is not considered here.
1997
15
55
60
Flooding Criterion for Evaporative Cooling on Horizontal Semi-Infinite Solids / M., Lederer; M., di Marzo; Tartarini, Paolo. - In: INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY. - ISSN 0392-8764. - STAMPA. - 15:(1997), pp. 55-60.
M., Lederer; M., di Marzo; Tartarini, Paolo
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/618104
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? ND
social impact