The internal flow field of a low-pressure, common-rail-type, multi-fuel injector is analyzed by means of numerical simulation and particular attention is devoted to the cavitation and aeration phenomena when using different fuel mixtures.The fluid-dynamics open source OpenFOAM code is used; and the original cavitation model (based on a barotropic equation of state and homogeneous equilibrium assumption) is extended in order to account also for gases dissolved in the liquid medium. The effect of air dissolution into liquid is determined by introducing the Henry law for the equilibrium condition and the time dependence of solubility is calculated on a Bunsen Coefficient basis.A preliminary study of test cases available in literature is carried out to address the model predictive capabilities and grid dependency. The calculated pressure distribution and discharge coefficient for different nozzle shapes and operating conditions are compared with the referenced experimental measurements.Finally, the influence of different fuel blends on the injector internal flow field under cavitating conditions is investigated to determine cavitating regions and injected mass flow rates for ethanol and ethanol/gasoline mixtures.

The Influence of Cavitation and Aeration in a Multi-Fuel Injector / Franzoni, Federica; Milani, Massimo; Montorsi, Luca. - In: SAE TECHNICAL PAPER. - ISSN 0148-7191. - STAMPA. - --:(2008), pp. -----. (Intervento presentato al convegno 2008 SAE Powertrains, Fuels and Lubricants Meeting tenutosi a Rosemont, IL, usa nel 2008) [10.4271/2008-01-2390].

The Influence of Cavitation and Aeration in a Multi-Fuel Injector

FRANZONI, Federica;MILANI, Massimo;MONTORSI, Luca
2008

Abstract

The internal flow field of a low-pressure, common-rail-type, multi-fuel injector is analyzed by means of numerical simulation and particular attention is devoted to the cavitation and aeration phenomena when using different fuel mixtures.The fluid-dynamics open source OpenFOAM code is used; and the original cavitation model (based on a barotropic equation of state and homogeneous equilibrium assumption) is extended in order to account also for gases dissolved in the liquid medium. The effect of air dissolution into liquid is determined by introducing the Henry law for the equilibrium condition and the time dependence of solubility is calculated on a Bunsen Coefficient basis.A preliminary study of test cases available in literature is carried out to address the model predictive capabilities and grid dependency. The calculated pressure distribution and discharge coefficient for different nozzle shapes and operating conditions are compared with the referenced experimental measurements.Finally, the influence of different fuel blends on the injector internal flow field under cavitating conditions is investigated to determine cavitating regions and injected mass flow rates for ethanol and ethanol/gasoline mixtures.
2008
2008 SAE Powertrains, Fuels and Lubricants Meeting
Rosemont, IL, usa
2008
--
--
--
Franzoni, Federica; Milani, Massimo; Montorsi, Luca
The Influence of Cavitation and Aeration in a Multi-Fuel Injector / Franzoni, Federica; Milani, Massimo; Montorsi, Luca. - In: SAE TECHNICAL PAPER. - ISSN 0148-7191. - STAMPA. - --:(2008), pp. -----. (Intervento presentato al convegno 2008 SAE Powertrains, Fuels and Lubricants Meeting tenutosi a Rosemont, IL, usa nel 2008) [10.4271/2008-01-2390].
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/618082
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 4
  • ???jsp.display-item.citation.isi??? ND
social impact