In this study, the stress state in a round-ended, taper-shanked lug loaded by an oblique point force is investigated. Numerical, analytical and, partially, photoelastic studies were carried out. In the analytical model, the lug is modelled as a plane problem, and it is partially likened to a ring examined with a Michell-type series solution; the differences in shape between lug and ring are overcome by endowing the series solution with degrees of freedom suitable for adapting the ring solution to the lug actual geometry. Three prompt access design charts are presented, which report the normalised stress concentration for three lug shank taper angles, for selection of five aspect ratios between bore radius and radius of the rounded extremity, and for load inclinations ranging from longitudinal to transverse directions

Maximum Stresses in a Taper-shanked Round-ended Lug Loaded by an Oblique Concentrated Force / Strozzi, Antonio; Baldini, Andrea; Giacopini, Matteo; Rivasi, Stefano; Rosi, Roberto. - In: STRAIN. - ISSN 0039-2103. - ELETTRONICO. - 43:(2007), pp. 109-118. [10.1111/j.1475-1305.2007.00321.x]

Maximum Stresses in a Taper-shanked Round-ended Lug Loaded by an Oblique Concentrated Force

STROZZI, Antonio;BALDINI, Andrea;GIACOPINI, Matteo;RIVASI, Stefano;ROSI, Roberto
2007

Abstract

In this study, the stress state in a round-ended, taper-shanked lug loaded by an oblique point force is investigated. Numerical, analytical and, partially, photoelastic studies were carried out. In the analytical model, the lug is modelled as a plane problem, and it is partially likened to a ring examined with a Michell-type series solution; the differences in shape between lug and ring are overcome by endowing the series solution with degrees of freedom suitable for adapting the ring solution to the lug actual geometry. Three prompt access design charts are presented, which report the normalised stress concentration for three lug shank taper angles, for selection of five aspect ratios between bore radius and radius of the rounded extremity, and for load inclinations ranging from longitudinal to transverse directions
2007
43
109
118
Maximum Stresses in a Taper-shanked Round-ended Lug Loaded by an Oblique Concentrated Force / Strozzi, Antonio; Baldini, Andrea; Giacopini, Matteo; Rivasi, Stefano; Rosi, Roberto. - In: STRAIN. - ISSN 0039-2103. - ELETTRONICO. - 43:(2007), pp. 109-118. [10.1111/j.1475-1305.2007.00321.x]
Strozzi, Antonio; Baldini, Andrea; Giacopini, Matteo; Rivasi, Stefano; Rosi, Roberto
File in questo prodotto:
File Dimensione Formato  
Strozzi_et_al_2007.pdf

Accesso riservato

Tipologia: Versione dell'autore revisionata e accettata per la pubblicazione
Dimensione 815.64 kB
Formato Adobe PDF
815.64 kB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/613344
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 9
  • ???jsp.display-item.citation.isi??? 8
social impact