TiO2 coatings were manufactured by the High Velocity Suspension Flame Spraying (HVSFS) technique using a nanopowder suspension. Their microstructure, nanohardness, tribological properties and photocatalytic activity were studied and compared to conventional atmospheric plasma sprayed (APS) and HVOF-sprayed TiO2 coatings manufactured using commercially available feedstock. The HVSFS process leaves a fairly large freedom to adjust coating properties (thickness, porosity, anatase content, hardness, etc…) according to the desired objective. Layers with higher anatase content and higher porosity can be produced to achieve higher photocatalytic efficiency, better than conventional APS and HVOF TiO2. Alternatively, dense protective layers can be deposited, possessing lower porosity and pore interconnectivity and better wear resistance than as- deposited APS and HVOF layers. In all cases, HVSFS-deposited layers are thinner (20 µm–60 µm) than those which can be obtained by conventional spraying processes

Properties of High Velocity Suspension Flame Sprayed (HVSFS) TiO2 coatings / Bolelli, Giovanni; Cannillo, Valeria; R., Gadow; A., Killinger; Lusvarghi, Luca; J., Rauch. - In: SURFACE & COATINGS TECHNOLOGY. - ISSN 0257-8972. - STAMPA. - 203:12(2009), pp. 1722-1732. [10.1016/j.surfcoat.2009.01.006]

Properties of High Velocity Suspension Flame Sprayed (HVSFS) TiO2 coatings

BOLELLI, Giovanni;CANNILLO, Valeria;LUSVARGHI, Luca;
2009

Abstract

TiO2 coatings were manufactured by the High Velocity Suspension Flame Spraying (HVSFS) technique using a nanopowder suspension. Their microstructure, nanohardness, tribological properties and photocatalytic activity were studied and compared to conventional atmospheric plasma sprayed (APS) and HVOF-sprayed TiO2 coatings manufactured using commercially available feedstock. The HVSFS process leaves a fairly large freedom to adjust coating properties (thickness, porosity, anatase content, hardness, etc…) according to the desired objective. Layers with higher anatase content and higher porosity can be produced to achieve higher photocatalytic efficiency, better than conventional APS and HVOF TiO2. Alternatively, dense protective layers can be deposited, possessing lower porosity and pore interconnectivity and better wear resistance than as- deposited APS and HVOF layers. In all cases, HVSFS-deposited layers are thinner (20 µm–60 µm) than those which can be obtained by conventional spraying processes
2009
203
12
1722
1732
Properties of High Velocity Suspension Flame Sprayed (HVSFS) TiO2 coatings / Bolelli, Giovanni; Cannillo, Valeria; R., Gadow; A., Killinger; Lusvarghi, Luca; J., Rauch. - In: SURFACE & COATINGS TECHNOLOGY. - ISSN 0257-8972. - STAMPA. - 203:12(2009), pp. 1722-1732. [10.1016/j.surfcoat.2009.01.006]
Bolelli, Giovanni; Cannillo, Valeria; R., Gadow; A., Killinger; Lusvarghi, Luca; J., Rauch
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/610679
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 60
  • ???jsp.display-item.citation.isi??? 50
social impact