Resin transfer moulding (RTM) is a low pressure moulding process, where a resin, mixed to a catalyst, is injected into a closed die, which vacuum has been obtained, containing a reinforcing pre-formed fibre [1, 2]; this fibre can be glass, carbon, aramidic fibre or a mixture of them. The resin and the catalyst are injected by a pump into a mixing head and then into the closed mould. When the resin is solidified, the die is opened and the piece is extracted [3, 4].Our study deals with the planning and the manufacturing of a low-cost modular die to be used in the resin transfer moulding (RTM) and it analyzes the costs and benefits of the suggested innovative solution.

Planning and manufacturing a mould for Resin Transfer Moulding / Iuliano, L; VIOLANTE M., G; Bassoli, Elena; Gatto, Andrea. - STAMPA. - (2004), pp. n.d.-n.d.. (Intervento presentato al convegno European Conference on Composite Materials tenutosi a Rhodes (Greece) nel May 31- June 3, 2004).

Planning and manufacturing a mould for Resin Transfer Moulding

BASSOLI, Elena;GATTO, Andrea
2004

Abstract

Resin transfer moulding (RTM) is a low pressure moulding process, where a resin, mixed to a catalyst, is injected into a closed die, which vacuum has been obtained, containing a reinforcing pre-formed fibre [1, 2]; this fibre can be glass, carbon, aramidic fibre or a mixture of them. The resin and the catalyst are injected by a pump into a mixing head and then into the closed mould. When the resin is solidified, the die is opened and the piece is extracted [3, 4].Our study deals with the planning and the manufacturing of a low-cost modular die to be used in the resin transfer moulding (RTM) and it analyzes the costs and benefits of the suggested innovative solution.
2004
European Conference on Composite Materials
Rhodes (Greece)
May 31- June 3, 2004
n.d.
n.d.
Iuliano, L; VIOLANTE M., G; Bassoli, Elena; Gatto, Andrea
Planning and manufacturing a mould for Resin Transfer Moulding / Iuliano, L; VIOLANTE M., G; Bassoli, Elena; Gatto, Andrea. - STAMPA. - (2004), pp. n.d.-n.d.. (Intervento presentato al convegno European Conference on Composite Materials tenutosi a Rhodes (Greece) nel May 31- June 3, 2004).
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/605081
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact