The GaInP/GaAs HBTs demonstrate outstadning long-term reliability performance. Nevrtheless they still suffer from a short-term DC current gain instability, known as the Burn-in effect. Even if the effect is usually attributed to Hydrogen contamination passivating the Carbon atoms employed as base dopant, the underlying physical mechanism is still unclear.The present work addresses the Burn-in effect by means of numerical simulations performed with the device simulation software BLAZE by Silvaco. The rsults give support to the hypothesis that the Burn-in effect is a surface related phenomenon. The simulations reveal that a fixed surface charge located near the edge of the emitter mesa should be introduced. The work points out also that simultaneous variations of both this charge and of the surface recombination velocity should be taken into account. This simulation approach could be a useful tool, in order to develop a chemical/physical model of the Burn-in effect.
Investigation of the burn-in effect in microwave GaInP/GaAs HBTs by means of numerical simulations / A., Rusani; J., Kuchenbecker; Borgarino, Mattia; R., Plana; J., Graffeuil; M., Vanzi. - STAMPA. - Not available:(1999), pp. 260-265. (Intervento presentato al convegno Symposium on High Performance Electron Devices for Microwave and Optoelectronic Applications tenutosi a London, UK nel 11/22/1999 - 11/23/1999).
Investigation of the burn-in effect in microwave GaInP/GaAs HBTs by means of numerical simulations
BORGARINO, Mattia;
1999
Abstract
The GaInP/GaAs HBTs demonstrate outstadning long-term reliability performance. Nevrtheless they still suffer from a short-term DC current gain instability, known as the Burn-in effect. Even if the effect is usually attributed to Hydrogen contamination passivating the Carbon atoms employed as base dopant, the underlying physical mechanism is still unclear.The present work addresses the Burn-in effect by means of numerical simulations performed with the device simulation software BLAZE by Silvaco. The rsults give support to the hypothesis that the Burn-in effect is a surface related phenomenon. The simulations reveal that a fixed surface charge located near the edge of the emitter mesa should be introduced. The work points out also that simultaneous variations of both this charge and of the surface recombination velocity should be taken into account. This simulation approach could be a useful tool, in order to develop a chemical/physical model of the Burn-in effect.Pubblicazioni consigliate
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris