Tetra-methyl ammonium hydroxide (TMAH) is an anisotropic silicon etchant that is gaining considerable use in silicon sensor micromachining due to its excellent compatibility with CMOS processing, selectivity, anisotropy and relatively low toxicity, as compared to the more used KOH and EDP etchants. In this paper, the influence of temperature and concentration of the TMAH solution together with oxidizer additions is studied in order to optimize the anisotropic silicon etching for MEMS fabrication. In particular this optimized etchant formulation has been employed at ITC-Irst in the development of a basic fabrication process for piezoresistive pressure sensors based on a silicon membrane and four resistors connected in a Weatherstone bridge configuration. The active element of the sensor, i.e. the thin silicon membrane, is formed by etching anisotropically from the backside of the wafer. Both process and etching have to be tuned and matched in order to obtain an optimum fabrication sequence. Some improvements such as higher etch rate and better surface finish have been obtained by the addition of ammonium peroxidsulfate as oxidizing agent under different conditions. This simplifies both the post processing and the tech set-up. The process parameters and the thermo-electro-mechanical characteristics of the pressure sensors were tested and are compared with the analytical and numerical simulations.

Optimization of TMAH etching for MEMS / S., Brida; L., Ferrario; V., Guarnieri; F., Giacomozzi; B., Margesin; M., Paranjape; Verzellesi, Giovanni; M., Zen. - STAMPA. - 3680:2(1999), pp. 969-976. (Intervento presentato al convegno Design, Test, and Microfabrication of MEMS/MOEMS (DTM) tenutosi a Paris (France) nel Mar.-Apr. 1999).

Optimization of TMAH etching for MEMS

VERZELLESI, Giovanni;
1999

Abstract

Tetra-methyl ammonium hydroxide (TMAH) is an anisotropic silicon etchant that is gaining considerable use in silicon sensor micromachining due to its excellent compatibility with CMOS processing, selectivity, anisotropy and relatively low toxicity, as compared to the more used KOH and EDP etchants. In this paper, the influence of temperature and concentration of the TMAH solution together with oxidizer additions is studied in order to optimize the anisotropic silicon etching for MEMS fabrication. In particular this optimized etchant formulation has been employed at ITC-Irst in the development of a basic fabrication process for piezoresistive pressure sensors based on a silicon membrane and four resistors connected in a Weatherstone bridge configuration. The active element of the sensor, i.e. the thin silicon membrane, is formed by etching anisotropically from the backside of the wafer. Both process and etching have to be tuned and matched in order to obtain an optimum fabrication sequence. Some improvements such as higher etch rate and better surface finish have been obtained by the addition of ammonium peroxidsulfate as oxidizing agent under different conditions. This simplifies both the post processing and the tech set-up. The process parameters and the thermo-electro-mechanical characteristics of the pressure sensors were tested and are compared with the analytical and numerical simulations.
1999
Design, Test, and Microfabrication of MEMS/MOEMS (DTM)
Paris (France)
Mar.-Apr. 1999
3680
969
976
S., Brida; L., Ferrario; V., Guarnieri; F., Giacomozzi; B., Margesin; M., Paranjape; Verzellesi, Giovanni; M., Zen
Optimization of TMAH etching for MEMS / S., Brida; L., Ferrario; V., Guarnieri; F., Giacomozzi; B., Margesin; M., Paranjape; Verzellesi, Giovanni; M., Zen. - STAMPA. - 3680:2(1999), pp. 969-976. (Intervento presentato al convegno Design, Test, and Microfabrication of MEMS/MOEMS (DTM) tenutosi a Paris (France) nel Mar.-Apr. 1999).
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/467012
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 3
  • ???jsp.display-item.citation.isi??? 2
social impact