In this paper a preliminary architecture of a force-feedback subsystem in steer-by-wire (SBW) systems is proposed. In SBW applications, a force feedback control is needed to recreate on a steering wheel (or another man-machine interface) a drive feeling like the one produced by a traditional mechanical steering system. In this case a brushless motor is used as force feedback actuator. To validate the proposed architecture we adopted a Hardware-in-the-Loop (HIL) approach. HIL is a powerful development tool. In particular, a dynamic model of the vehicle is implemented in virtual hardware. The model is needed to evaluate the realized hardware (ECU and inverter needed to operate the motor) and to validate the force feedback control algorithms before the real implementation of the complete SBW system.Experimental results show as the realized ECU and the implemented control algorithm based on a field oriented control technique are correct and particularly suitable for steer-by-wire applications.

Force Feedback in Steer-by-Wire Systems: Architecture and Experimental Results / Bertacchini, Alessandro; Tamagnini, Luca; Pavan, Paolo. - ELETTRONICO. - 4:(2006), pp. 3050-3055. (Intervento presentato al convegno International Symposium on Industrial Electronics 2006, ISIE 2006 tenutosi a Montreal, QC, can nel 9-13, July) [10.1109/ISIE.2006.296102].

Force Feedback in Steer-by-Wire Systems: Architecture and Experimental Results

BERTACCHINI, Alessandro;TAMAGNINI, Luca;PAVAN, Paolo
2006

Abstract

In this paper a preliminary architecture of a force-feedback subsystem in steer-by-wire (SBW) systems is proposed. In SBW applications, a force feedback control is needed to recreate on a steering wheel (or another man-machine interface) a drive feeling like the one produced by a traditional mechanical steering system. In this case a brushless motor is used as force feedback actuator. To validate the proposed architecture we adopted a Hardware-in-the-Loop (HIL) approach. HIL is a powerful development tool. In particular, a dynamic model of the vehicle is implemented in virtual hardware. The model is needed to evaluate the realized hardware (ECU and inverter needed to operate the motor) and to validate the force feedback control algorithms before the real implementation of the complete SBW system.Experimental results show as the realized ECU and the implemented control algorithm based on a field oriented control technique are correct and particularly suitable for steer-by-wire applications.
2006
International Symposium on Industrial Electronics 2006, ISIE 2006
Montreal, QC, can
9-13, July
4
3050
3055
Bertacchini, Alessandro; Tamagnini, Luca; Pavan, Paolo
Force Feedback in Steer-by-Wire Systems: Architecture and Experimental Results / Bertacchini, Alessandro; Tamagnini, Luca; Pavan, Paolo. - ELETTRONICO. - 4:(2006), pp. 3050-3055. (Intervento presentato al convegno International Symposium on Industrial Electronics 2006, ISIE 2006 tenutosi a Montreal, QC, can nel 9-13, July) [10.1109/ISIE.2006.296102].
File in questo prodotto:
File Dimensione Formato  
ISIE06.pdf

Accesso riservato

Tipologia: Versione pubblicata dall'editore
Dimensione 6.94 MB
Formato Adobe PDF
6.94 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
ISIE06_CameraReady.pdf

Accesso riservato

Tipologia: Versione dell'autore revisionata e accettata per la pubblicazione
Dimensione 444.07 kB
Formato Adobe PDF
444.07 kB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/464207
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 11
  • ???jsp.display-item.citation.isi??? 8
social impact