Metal matrix composites are manufactured in a variety of grades and forms, but machining is usually necessary to obtain finished engineering components. The presence of the hard reinforcing ceramic makes these materials difficult for conventional machining. Wire electro discharge machining (WEDM) is used for the processing of heat-treated high-quality alloys or for the machining of complex shapes in advanced materials. This paper describes WEDM tests performed under one roughing and two finishing conditions on two composites, SiC/2009Al alloy with 15% whiskers and with 20% particles reinforcement. Some roughed and some finished surfaces were glass-bead peened. To understand the reinforcement and the behaviour of the matrix during the machining of both composites, the machined surfaces, their sections and profiles were examined by scanning electron microscopy, and energy dispersive semi-quantitative analyses of X-rays were also carried out. The surface roughness for the process parameters used are indicated.

Cutting Mechanisms and Surface Features of WED Machined MMCs / Gatto, Andrea; Iuliano, L.. - In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. - ISSN 0924-0136. - STAMPA. - 65:(1997), pp. 209-214.

Cutting Mechanisms and Surface Features of WED Machined MMCs

GATTO, Andrea;
1997

Abstract

Metal matrix composites are manufactured in a variety of grades and forms, but machining is usually necessary to obtain finished engineering components. The presence of the hard reinforcing ceramic makes these materials difficult for conventional machining. Wire electro discharge machining (WEDM) is used for the processing of heat-treated high-quality alloys or for the machining of complex shapes in advanced materials. This paper describes WEDM tests performed under one roughing and two finishing conditions on two composites, SiC/2009Al alloy with 15% whiskers and with 20% particles reinforcement. Some roughed and some finished surfaces were glass-bead peened. To understand the reinforcement and the behaviour of the matrix during the machining of both composites, the machined surfaces, their sections and profiles were examined by scanning electron microscopy, and energy dispersive semi-quantitative analyses of X-rays were also carried out. The surface roughness for the process parameters used are indicated.
1997
65
209
214
Cutting Mechanisms and Surface Features of WED Machined MMCs / Gatto, Andrea; Iuliano, L.. - In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. - ISSN 0924-0136. - STAMPA. - 65:(1997), pp. 209-214.
Gatto, Andrea; Iuliano, L.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/453625
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 49
  • ???jsp.display-item.citation.isi??? ND
social impact