The present work is aimed at analyzing the cooling of hot solid surfaces induced by liquid droplets. In particular, the study is focused on the comparison between the cooling effects obtained with multiple droplets and sparse spray configurations.A new, non-intrusive measurement of the transient contact temperature between impinging droplets and hot solid surfaces is used and described. An experimental apparatus was built and set up in order to approach the non-trivial problem of the measurement of a solid-liquid interface temperature after droplet impingement. The solid-liquid interface temperature was monitored from below through a transparent-to-infrared material. That material had been coated with a very thin layer of high-emissivity, opaque paint on its upper side, so that it could effectively respond to the infrared camera located below.The paper reports the main results that have been collected to date, with particular regard to the approaches used to coat the transparent solid. Some considerations are also expressed about the effectiveness of the proposed method and about the improvements that are currently being implemented to get new and more accurate interface temperature measurements.

Multi-droplet cooling: Experimental tests on infrared-transparent media / Santangelo, Paolo Emilio; Tarozzi, Luca; Tartarini, Paolo. - STAMPA. - (2006), pp. 419-424. (Intervento presentato al convegno XXVI Congresso Nazionale UIT sulla Trasmissione del Calore tenutosi a Napoli, Italia nel 21-23 Giugno 2006).

Multi-droplet cooling: Experimental tests on infrared-transparent media

Santangelo, Paolo Emilio;Tarozzi, Luca;Tartarini, Paolo
2006

Abstract

The present work is aimed at analyzing the cooling of hot solid surfaces induced by liquid droplets. In particular, the study is focused on the comparison between the cooling effects obtained with multiple droplets and sparse spray configurations.A new, non-intrusive measurement of the transient contact temperature between impinging droplets and hot solid surfaces is used and described. An experimental apparatus was built and set up in order to approach the non-trivial problem of the measurement of a solid-liquid interface temperature after droplet impingement. The solid-liquid interface temperature was monitored from below through a transparent-to-infrared material. That material had been coated with a very thin layer of high-emissivity, opaque paint on its upper side, so that it could effectively respond to the infrared camera located below.The paper reports the main results that have been collected to date, with particular regard to the approaches used to coat the transparent solid. Some considerations are also expressed about the effectiveness of the proposed method and about the improvements that are currently being implemented to get new and more accurate interface temperature measurements.
2006
XXVI Congresso Nazionale UIT sulla Trasmissione del Calore
Napoli, Italia
21-23 Giugno 2006
419
424
Santangelo, Paolo Emilio; Tarozzi, Luca; Tartarini, Paolo
Multi-droplet cooling: Experimental tests on infrared-transparent media / Santangelo, Paolo Emilio; Tarozzi, Luca; Tartarini, Paolo. - STAMPA. - (2006), pp. 419-424. (Intervento presentato al convegno XXVI Congresso Nazionale UIT sulla Trasmissione del Calore tenutosi a Napoli, Italia nel 21-23 Giugno 2006).
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/420810
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact