The wear resistance of plasma-sprayed ceramic coatings (Al2O3, Al2O3-13%TiO2, Cr2O3) has been investigated through pin-on-disk and dry sand-steel wheel tests, has been correlated to microstructural and micromechanical characteristics (microhardness, fracture toughness) and has been compared to well-known platings (such as Cr electroplating and electroless Ni) and HVOF-sprayed cermets (WC-17%Co, WC-10%Co-4%Cr). Plasma-sprayed ceramics are hard but brittle: dry particles abrasion occurs through splats detachment. The toughest coating (Al2O3) displays the highest wear resistance, which in fact overcomes HVOF-sprayed cermets and Cr electroplating, when a low number of wheel revolutions are considered. In pin-on-disk tests, no coating undergoes wear loss against the 100Cr6 ball, that possess lower hardness. Against the alumina ball, Al2O3 and Al2O3-TiO2. coatings show high wear rates and friction coefficients (due to chemical affinity), while Cr2O3 possesses better wear resistance, lower friction coefficient and inflicts less wear on the counterpart. Cr2O3 wear scar consists in plastically deformed splats and debris forming a quite adherent protective tribofilm. (c) 2006 Elsevier B.V. All rights reserved.

Wear behaviour of thermally sprayed ceramic oxide coatings / Bolelli, Giovanni; Cannillo, Valeria; Lusvarghi, Luca; Manfredini, Tiziano. - In: WEAR. - ISSN 0043-1648. - STAMPA. - 261:11-12(2006), pp. 1298-1315. [10.1016/j.wear.2006.03.023]

Wear behaviour of thermally sprayed ceramic oxide coatings

BOLELLI, Giovanni;CANNILLO, Valeria;LUSVARGHI, Luca;MANFREDINI, Tiziano
2006

Abstract

The wear resistance of plasma-sprayed ceramic coatings (Al2O3, Al2O3-13%TiO2, Cr2O3) has been investigated through pin-on-disk and dry sand-steel wheel tests, has been correlated to microstructural and micromechanical characteristics (microhardness, fracture toughness) and has been compared to well-known platings (such as Cr electroplating and electroless Ni) and HVOF-sprayed cermets (WC-17%Co, WC-10%Co-4%Cr). Plasma-sprayed ceramics are hard but brittle: dry particles abrasion occurs through splats detachment. The toughest coating (Al2O3) displays the highest wear resistance, which in fact overcomes HVOF-sprayed cermets and Cr electroplating, when a low number of wheel revolutions are considered. In pin-on-disk tests, no coating undergoes wear loss against the 100Cr6 ball, that possess lower hardness. Against the alumina ball, Al2O3 and Al2O3-TiO2. coatings show high wear rates and friction coefficients (due to chemical affinity), while Cr2O3 possesses better wear resistance, lower friction coefficient and inflicts less wear on the counterpart. Cr2O3 wear scar consists in plastically deformed splats and debris forming a quite adherent protective tribofilm. (c) 2006 Elsevier B.V. All rights reserved.
2006
261
11-12
1298
1315
Wear behaviour of thermally sprayed ceramic oxide coatings / Bolelli, Giovanni; Cannillo, Valeria; Lusvarghi, Luca; Manfredini, Tiziano. - In: WEAR. - ISSN 0043-1648. - STAMPA. - 261:11-12(2006), pp. 1298-1315. [10.1016/j.wear.2006.03.023]
Bolelli, Giovanni; Cannillo, Valeria; Lusvarghi, Luca; Manfredini, Tiziano
File in questo prodotto:
File Dimensione Formato  
published.pdf

Accesso riservato

Tipologia: Versione dell'autore revisionata e accettata per la pubblicazione
Dimensione 3.61 MB
Formato Adobe PDF
3.61 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/305899
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 233
  • ???jsp.display-item.citation.isi??? 195
social impact