The aim of the present work was the assessment of the impact of deep-rolling and shot-peening performed in the underhead and in the unthreaded shank of two high strength screws (36 NiCrMo and 42 CrMoV) for fatigue life enhancement. The experimental campaign consisted of six combinations, including the non-treated state. The aforementioned treatments were evaluated alone or with shot-peening performed after deep-rolling in the underhead fillet of the screws. Deep rolling was carried out at the optimal rolling force, whereas two shot diameters were considered for shot-peening (Z100 and UFS70). The results have been evaluated in terms of fatigue limits and factor effects have been assessed by marginal mean plots.

Effects of Surface Treatments on the Fatigue Response of High Strength Fasteners / Reggiani, Barbara; Olmi, Giorgio; Orazi, Leonardo; Tomesani, Luca; Fini, Stefano; Barozzi, Lorenzo; Pelaccia, Riccardo; Bandini, Michele. - 813:(2019), pp. 352-357. (Intervento presentato al convegno SMT33 - 33rd International Conference on Surfcae Modification Technologies tenutosi a Napoli nel 26-27-28 Giugno 2019) [10.4028/www.scientific.net/KEM.813.352].

Effects of Surface Treatments on the Fatigue Response of High Strength Fasteners

Barbara Reggiani
;
Leonardo Orazi;Riccardo Pelaccia;
2019

Abstract

The aim of the present work was the assessment of the impact of deep-rolling and shot-peening performed in the underhead and in the unthreaded shank of two high strength screws (36 NiCrMo and 42 CrMoV) for fatigue life enhancement. The experimental campaign consisted of six combinations, including the non-treated state. The aforementioned treatments were evaluated alone or with shot-peening performed after deep-rolling in the underhead fillet of the screws. Deep rolling was carried out at the optimal rolling force, whereas two shot diameters were considered for shot-peening (Z100 and UFS70). The results have been evaluated in terms of fatigue limits and factor effects have been assessed by marginal mean plots.
2019
lug-2019
SMT33 - 33rd International Conference on Surfcae Modification Technologies
Napoli
26-27-28 Giugno 2019
813
352
357
Reggiani, Barbara; Olmi, Giorgio; Orazi, Leonardo; Tomesani, Luca; Fini, Stefano; Barozzi, Lorenzo; Pelaccia, Riccardo; Bandini, Michele
Effects of Surface Treatments on the Fatigue Response of High Strength Fasteners / Reggiani, Barbara; Olmi, Giorgio; Orazi, Leonardo; Tomesani, Luca; Fini, Stefano; Barozzi, Lorenzo; Pelaccia, Riccardo; Bandini, Michele. - 813:(2019), pp. 352-357. (Intervento presentato al convegno SMT33 - 33rd International Conference on Surfcae Modification Technologies tenutosi a Napoli nel 26-27-28 Giugno 2019) [10.4028/www.scientific.net/KEM.813.352].
File in questo prodotto:
File Dimensione Formato  
KEM.813.352.pdf

Accesso riservato

Tipologia: Versione pubblicata dall'editore
Dimensione 1.38 MB
Formato Adobe PDF
1.38 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/1180146
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 2
  • ???jsp.display-item.citation.isi??? ND
social impact