The use of multi-materials components has the benefit of coupling each material's benefit where it is needed, thus achieving, for instance, heat, wear and corrosion resistance. Joining of dissimilar metals is a challenging task due to the large differences in properties. In this framework, the use of (Quasi Continuous Wave (QCW) Fiber Lasers) proved to be effective in multi-materials components assembly thanks to the high power density but low energy-input. In this paper the laser welding of dissimilar materials, namely stellite and stainless steel, is investigated and optimized in terms of corrosion resistance, comparing the results to conventional brazing joining. Results demonstrate that the optimized laser welding conditions, with the use of a proper filler material, lead to the obtainment of defect-free joints, with minimum alteration of the base materials.

Optimization of laser welding of dissimilar corrosion resistant alloys / Cavallini, Michele; Veronesi, Paolo; Lusvarghi, Luca; Colombini, Elenca; Giovanardi, Roberto; Rigon, Lorenzo. - (2017), pp. 247-251. (Intervento presentato al convegno 3rd IEEE International Forum on Research and Technologies for Society and Industry, RTSI 2017 tenutosi a Modena nel 11-13 September 2017) [10.1109/RTSI.2017.8065935].

Optimization of laser welding of dissimilar corrosion resistant alloys

Veronesi, Paolo;Lusvarghi, Luca;Colombini, Elenca;Giovanardi, Roberto;
2017

Abstract

The use of multi-materials components has the benefit of coupling each material's benefit where it is needed, thus achieving, for instance, heat, wear and corrosion resistance. Joining of dissimilar metals is a challenging task due to the large differences in properties. In this framework, the use of (Quasi Continuous Wave (QCW) Fiber Lasers) proved to be effective in multi-materials components assembly thanks to the high power density but low energy-input. In this paper the laser welding of dissimilar materials, namely stellite and stainless steel, is investigated and optimized in terms of corrosion resistance, comparing the results to conventional brazing joining. Results demonstrate that the optimized laser welding conditions, with the use of a proper filler material, lead to the obtainment of defect-free joints, with minimum alteration of the base materials.
2017
3rd IEEE International Forum on Research and Technologies for Society and Industry, RTSI 2017
Modena
11-13 September 2017
247
251
Cavallini, Michele; Veronesi, Paolo; Lusvarghi, Luca; Colombini, Elenca; Giovanardi, Roberto; Rigon, Lorenzo
Optimization of laser welding of dissimilar corrosion resistant alloys / Cavallini, Michele; Veronesi, Paolo; Lusvarghi, Luca; Colombini, Elenca; Giovanardi, Roberto; Rigon, Lorenzo. - (2017), pp. 247-251. (Intervento presentato al convegno 3rd IEEE International Forum on Research and Technologies for Society and Industry, RTSI 2017 tenutosi a Modena nel 11-13 September 2017) [10.1109/RTSI.2017.8065935].
File in questo prodotto:
File Dimensione Formato  
2017_RTSI_2.pdf

Open access

Tipologia: Versione pubblicata dall'editore
Dimensione 2.11 MB
Formato Adobe PDF
2.11 MB Adobe PDF Visualizza/Apri
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/1154584
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 2
  • ???jsp.display-item.citation.isi??? 0
social impact