An electronic tongue (ET) consisting of two voltammetric sensors, namely a poly-ethylendioxythiophene modified Pt electrode and a sonogel carbon electrode, has been developed aiming at monitoring grape ripening. To test the effectiveness of device and measurement procedures developed, samples of three varieties of grapes have been collected from veraison to harvest of the mature grape bunches. The derived musts have been then submitted to electrochemical investigation using Differential Pulse Voltammetry technique. At the same time, quantitative determination of specific analytical parameters for the evaluation of technological and phenolic maturity of each sample has been performed by means of conventional analytical techniques. After a preliminary inspection by principal component analysis, calibration models were calculated both by partial least squares (PLS) on the whole signals and by the interval partial least squares (iPLS) variable selection algorithm, in order to estimate physico-chemical parameters. Calibration models have been obtained both considering separately the signals of each sensor of the ET, and by proper fusion of the voltammetric data selected from the two sensors by iPLS. The latter procedure allowed us to check the possible complementarity of the information brought by the different electrodes. Good predictive models have been obtained for estimation of pH, total acidity, sugar content, and anthocyanins content. The application of the ET for fast evaluation of grape ripening and of most suitable harvesting time is proposed.

An electronic tongue (ET) consisting of two voltammetric sensors, namely a poly-ethylendioxythiophene modified Pt electrode and a sonogel carbon electrode, has been developed aiming at monitoring grape ripening. To test the effectiveness of device and measurement procedures developed, samples of three varieties of grapes have been collected from veraison to harvest of the mature grape bunches. The derived musts have been then submitted to electrochemical investigation using Differential Pulse Voltammetry technique. At the same time, quantitative determination of specific analytical parameters for the evaluation of technological and phenolic maturity of each sample has been performed by means of conventional analytical techniques. After a preliminary inspection by principal component analysis, calibration models were calculated both by partial least squares (PLS) on the whole signals and by the interval partial least squares (iPLS) variable selection algorithm, in order to estimate physico-chemical parameters. Calibration models have been obtained both considering separately the signals of each sensor of the ET, and by proper fusion of the voltammetric data selected from the two sensors by iPLS. The latter procedure allowed us to check the possible complementarity of the information brought by the different electrodes. Good predictive models have been obtained for estimation of pH, total acidity, sugar content, and anthocyanins content. The application of the ET for fast evaluation of grape ripening and of most suitable harvesting time is proposed.

Prediction of parameters related to grape ripening by multivariate calibration of voltammetric signals acquired by an electronic tongue / Pigani, Laura; VASILE SIMONE, Giuseppe; Foca, Giorgia; Ulrici, Alessandro; Masino, Francesca; Cubillana Aguilera, L.; Calvini, Rosalba; Seeber, Renato. - In: TALANTA. - ISSN 0039-9140. - 178:(2018), pp. 178-187. [10.1016/j.talanta.2017.09.027]

Prediction of parameters related to grape ripening by multivariate calibration of voltammetric signals acquired by an electronic tongue

PIGANI, Laura
;
VASILE SIMONE, GIUSEPPE;FOCA, Giorgia;ULRICI, Alessandro;MASINO, Francesca;CALVINI, ROSALBA;SEEBER, Renato
2018

Abstract

An electronic tongue (ET) consisting of two voltammetric sensors, namely a poly-ethylendioxythiophene modified Pt electrode and a sonogel carbon electrode, has been developed aiming at monitoring grape ripening. To test the effectiveness of device and measurement procedures developed, samples of three varieties of grapes have been collected from veraison to harvest of the mature grape bunches. The derived musts have been then submitted to electrochemical investigation using Differential Pulse Voltammetry technique. At the same time, quantitative determination of specific analytical parameters for the evaluation of technological and phenolic maturity of each sample has been performed by means of conventional analytical techniques. After a preliminary inspection by principal component analysis, calibration models were calculated both by partial least squares (PLS) on the whole signals and by the interval partial least squares (iPLS) variable selection algorithm, in order to estimate physico-chemical parameters. Calibration models have been obtained both considering separately the signals of each sensor of the ET, and by proper fusion of the voltammetric data selected from the two sensors by iPLS. The latter procedure allowed us to check the possible complementarity of the information brought by the different electrodes. Good predictive models have been obtained for estimation of pH, total acidity, sugar content, and anthocyanins content. The application of the ET for fast evaluation of grape ripening and of most suitable harvesting time is proposed.
2018
12-set-2017
178
178
187
Prediction of parameters related to grape ripening by multivariate calibration of voltammetric signals acquired by an electronic tongue / Pigani, Laura; VASILE SIMONE, Giuseppe; Foca, Giorgia; Ulrici, Alessandro; Masino, Francesca; Cubillana Aguilera, L.; Calvini, Rosalba; Seeber, Renato. - In: TALANTA. - ISSN 0039-9140. - 178:(2018), pp. 178-187. [10.1016/j.talanta.2017.09.027]
Pigani, Laura; VASILE SIMONE, Giuseppe; Foca, Giorgia; Ulrici, Alessandro; Masino, Francesca; Cubillana Aguilera, L.; Calvini, Rosalba; Seeber, Renato
File in questo prodotto:
File Dimensione Formato  
ET_mosti.pdf

Accesso riservato

Tipologia: Versione pubblicata dall'editore
Dimensione 809.96 kB
Formato Adobe PDF
809.96 kB Adobe PDF   Visualizza/Apri   Richiedi una copia
POST_PRINT_j.talanta.2017.09.027.pdf

Open access

Tipologia: Versione dell'autore revisionata e accettata per la pubblicazione
Dimensione 1.09 MB
Formato Adobe PDF
1.09 MB Adobe PDF Visualizza/Apri
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/1149586
Citazioni
  • ???jsp.display-item.citation.pmc??? 5
  • Scopus 20
  • ???jsp.display-item.citation.isi??? 20
social impact