Magnetite nanoparticles in the range 7-10.5 nm were prepared by non hydrolytic sol-gel (NHSG) process in the presence of benzyl alcohol in different concentrations. The suspensions were mixed with bisphenol A diglycidyl ether (DGEBA) and cured in the presence of ytterbium(III) trifluoromethanesulfonate as cationic initiator. Magnetite nanoparticles and epoxy nanocomposites were characterized by structural, chemical and magnetic techniques. A procedure of data analysis is proposed to determine value, sign and surface contribution of the magnetic anisotropy of nanoparticles by comparing the information gained from field-cooled/zero-field-cooled magnetization curves and TEM images. Above blocking temperature, the nanoparticles dispersed in the epoxy resin give rise to an interacting superparamagnetic system and follow the corresponding scaling law. A model explains why the magnetic interaction energy depends not only on nanoparticle concentration in the epoxy but also on concentration fluctuations, being larger in samples where the nanoparticle dispersion is not uniform.

Epoxy nanocomposites functionalized with in situ generated magnetite nanocrystals: Microstructure, magnetic properties, interaction among magnetic particles / Sciancalepore, Corrado; Bondioli, Federica; Messori, Massimo; Barrera, Gabriele; Tiberto, Paola; Allia, Paolo. - In: POLYMER. - ISSN 0032-3861. - STAMPA. - 59:(2015), pp. 278-289. [10.1016/j.polymer.2014.12.047]

Epoxy nanocomposites functionalized with in situ generated magnetite nanocrystals: Microstructure, magnetic properties, interaction among magnetic particles

SCIANCALEPORE, CORRADO;MESSORI, Massimo;
2015

Abstract

Magnetite nanoparticles in the range 7-10.5 nm were prepared by non hydrolytic sol-gel (NHSG) process in the presence of benzyl alcohol in different concentrations. The suspensions were mixed with bisphenol A diglycidyl ether (DGEBA) and cured in the presence of ytterbium(III) trifluoromethanesulfonate as cationic initiator. Magnetite nanoparticles and epoxy nanocomposites were characterized by structural, chemical and magnetic techniques. A procedure of data analysis is proposed to determine value, sign and surface contribution of the magnetic anisotropy of nanoparticles by comparing the information gained from field-cooled/zero-field-cooled magnetization curves and TEM images. Above blocking temperature, the nanoparticles dispersed in the epoxy resin give rise to an interacting superparamagnetic system and follow the corresponding scaling law. A model explains why the magnetic interaction energy depends not only on nanoparticle concentration in the epoxy but also on concentration fluctuations, being larger in samples where the nanoparticle dispersion is not uniform.
2015
59
278
289
Epoxy nanocomposites functionalized with in situ generated magnetite nanocrystals: Microstructure, magnetic properties, interaction among magnetic particles / Sciancalepore, Corrado; Bondioli, Federica; Messori, Massimo; Barrera, Gabriele; Tiberto, Paola; Allia, Paolo. - In: POLYMER. - ISSN 0032-3861. - STAMPA. - 59:(2015), pp. 278-289. [10.1016/j.polymer.2014.12.047]
Sciancalepore, Corrado; Bondioli, Federica; Messori, Massimo; Barrera, Gabriele; Tiberto, Paola; Allia, Paolo
File in questo prodotto:
File Dimensione Formato  
Polymer 59 (2015) 278-289.pdf

Accesso riservato

Tipologia: Versione pubblicata dall'editore
Dimensione 3.04 MB
Formato Adobe PDF
3.04 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/1111893
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 22
  • ???jsp.display-item.citation.isi??? 18
social impact