Microwave rapid and selective heating is successfully applied to produce freestanding capsule-less doses of powdered beans or leaves for hot beverages preparation. 1 or 3-person doses, suitable for use in conventional hot beverage preparation machines are obtained in less than 5 seconds, without any additives except for water. Microwaves at 2.45 GHz are applied to allow shape retention and surface hardening of the pressed powders, thanks to the rapid steam generation. Load is contained inside a PTFE-lined applicator presenting micro-holes on two sides, to control vapor outlet. The use of rapidly generated steam, preferentially on the outer layers of the load, leads to weak bonding of the powders, without affecting the final taste of the brewed beverage. Modeling of the temperature- and moisture-dependent dielectric properties is used to optimize the applicator geometry, so that the outer layers of the pressed powders are preferentially heated, thus creating a rigid 'shell' hosting the remaining pressed powders.

Microwave processing of capsule-less powdered beverages / Veronesi, Paolo; Colombini, Elena; Garuti, M.; Botti, C.. - (2014), pp. 1-3. (Intervento presentato al convegno 2014 IEEE MTT-S International Microwave Symposium, IMS 2014 tenutosi a Tampa, FL, usa nel 2014) [10.1109/MWSYM.2014.6848445].

Microwave processing of capsule-less powdered beverages

VERONESI, Paolo;COLOMBINI, Elena;
2014

Abstract

Microwave rapid and selective heating is successfully applied to produce freestanding capsule-less doses of powdered beans or leaves for hot beverages preparation. 1 or 3-person doses, suitable for use in conventional hot beverage preparation machines are obtained in less than 5 seconds, without any additives except for water. Microwaves at 2.45 GHz are applied to allow shape retention and surface hardening of the pressed powders, thanks to the rapid steam generation. Load is contained inside a PTFE-lined applicator presenting micro-holes on two sides, to control vapor outlet. The use of rapidly generated steam, preferentially on the outer layers of the load, leads to weak bonding of the powders, without affecting the final taste of the brewed beverage. Modeling of the temperature- and moisture-dependent dielectric properties is used to optimize the applicator geometry, so that the outer layers of the pressed powders are preferentially heated, thus creating a rigid 'shell' hosting the remaining pressed powders.
2014
2014 IEEE MTT-S International Microwave Symposium, IMS 2014
Tampa, FL, usa
2014
1
3
Veronesi, Paolo; Colombini, Elena; Garuti, M.; Botti, C.
Microwave processing of capsule-less powdered beverages / Veronesi, Paolo; Colombini, Elena; Garuti, M.; Botti, C.. - (2014), pp. 1-3. (Intervento presentato al convegno 2014 IEEE MTT-S International Microwave Symposium, IMS 2014 tenutosi a Tampa, FL, usa nel 2014) [10.1109/MWSYM.2014.6848445].
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/1076857
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? 0
social impact