Increased CMOS performance requires the introduction of alternative materials as substrate and gate dielectrics. III-V materials and in particular InGaAs can provide superior electron mobility compared to classic Si substrates. However, such substrate materials have non-optimal dielectric-semiconductor interfaces that can drastically reduce the device performance. Techniques for the extraction of interface and border trap profiles are required for the characterization and optimization of these materials. In this paper we present a new procedure relying on a physical charge-transport model including trap assisted tunneling, lattice relaxation and trap assisted generation and recombination of minority carriers. The procedure allows the extraction of interface and border trap densities from capacitance voltage characteristics measured at different frequencies. The technique is applied to characterize InGaAs MOSFETs Al2O3/ZrO2 stacks of different thicknesses and fabricated with different annealing conditions

A new method for extracting interface state and border trap densities in high-k/III-V MOSFETs / Sereni, Gabriele; Vandelli, ; L, .; Larcher, Luca; Morassi, ; L, .; Veksler, ; D, .; Bersuker,. - (2014), p. 2C.3.6. (Intervento presentato al convegno 52nd IEEE International Reliability Physics Symposium, IRPS 2014 tenutosi a Waikoloa, HI, usa nel 1/06/2014) [10.1109/IRPS.2014.6860590].

A new method for extracting interface state and border trap densities in high-k/III-V MOSFETs

SERENI, GABRIELE;LARCHER, Luca;
2014

Abstract

Increased CMOS performance requires the introduction of alternative materials as substrate and gate dielectrics. III-V materials and in particular InGaAs can provide superior electron mobility compared to classic Si substrates. However, such substrate materials have non-optimal dielectric-semiconductor interfaces that can drastically reduce the device performance. Techniques for the extraction of interface and border trap profiles are required for the characterization and optimization of these materials. In this paper we present a new procedure relying on a physical charge-transport model including trap assisted tunneling, lattice relaxation and trap assisted generation and recombination of minority carriers. The procedure allows the extraction of interface and border trap densities from capacitance voltage characteristics measured at different frequencies. The technique is applied to characterize InGaAs MOSFETs Al2O3/ZrO2 stacks of different thicknesses and fabricated with different annealing conditions
2014
52nd IEEE International Reliability Physics Symposium, IRPS 2014
Waikoloa, HI, usa
1/06/2014
2C.3.6
Sereni, Gabriele; Vandelli, ; L, .; Larcher, Luca; Morassi, ; L, .; Veksler, ; D, .; Bersuker,
A new method for extracting interface state and border trap densities in high-k/III-V MOSFETs / Sereni, Gabriele; Vandelli, ; L, .; Larcher, Luca; Morassi, ; L, .; Veksler, ; D, .; Bersuker,. - (2014), p. 2C.3.6. (Intervento presentato al convegno 52nd IEEE International Reliability Physics Symposium, IRPS 2014 tenutosi a Waikoloa, HI, usa nel 1/06/2014) [10.1109/IRPS.2014.6860590].
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/1076383
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 8
  • ???jsp.display-item.citation.isi??? 4
social impact