This paper presents design strategies for the optimized design of the rotor poles in synchronous permanent magnet machines. The strategies are aimed at the reduction of torque ripple and cogging torque. Sinusoidally rounded magnet and rotor step-skewing are investigated, then a new proposal to reduce the cost of magnetic pole made in rare earth is presented. The goal is to introduce into a rotor pole, a fraction of low cost ferrite magnets on either side of the main rare earth NdFeB permanent magnet. The design procedure begins with some analytical consideration that allows to optimize the geometrical design of the magnets. Using Finite Element (FE) simulations, the effectiveness of the analytical model is verified and the results of the various methods are compared.

Design optimization for torque ripple minimization and poles cost reduction with hybrid permanent magnets / Bianchini, Claudio; Davoli, Matteo; Immovilli, Fabio; Lorenzani, Emilio. - ELETTRONICO. - (2014), pp. 483-489. (Intervento presentato al convegno IEEE IECON 2014 tenutosi a Dallas, TX, USA nel Oct. 29 2014-Nov. 1 2014) [10.1109/IECON.2014.7048544].

Design optimization for torque ripple minimization and poles cost reduction with hybrid permanent magnets

BIANCHINI, Claudio;DAVOLI, MATTEO;IMMOVILLI, Fabio;LORENZANI, EMILIO
2014

Abstract

This paper presents design strategies for the optimized design of the rotor poles in synchronous permanent magnet machines. The strategies are aimed at the reduction of torque ripple and cogging torque. Sinusoidally rounded magnet and rotor step-skewing are investigated, then a new proposal to reduce the cost of magnetic pole made in rare earth is presented. The goal is to introduce into a rotor pole, a fraction of low cost ferrite magnets on either side of the main rare earth NdFeB permanent magnet. The design procedure begins with some analytical consideration that allows to optimize the geometrical design of the magnets. Using Finite Element (FE) simulations, the effectiveness of the analytical model is verified and the results of the various methods are compared.
2014
IEEE IECON 2014
Dallas, TX, USA
Oct. 29 2014-Nov. 1 2014
483
489
Bianchini, Claudio; Davoli, Matteo; Immovilli, Fabio; Lorenzani, Emilio
Design optimization for torque ripple minimization and poles cost reduction with hybrid permanent magnets / Bianchini, Claudio; Davoli, Matteo; Immovilli, Fabio; Lorenzani, Emilio. - ELETTRONICO. - (2014), pp. 483-489. (Intervento presentato al convegno IEEE IECON 2014 tenutosi a Dallas, TX, USA nel Oct. 29 2014-Nov. 1 2014) [10.1109/IECON.2014.7048544].
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/1074540
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 4
  • ???jsp.display-item.citation.isi??? 3
social impact