Cold spraying has shown its potential to produce metallic and composite coatings with high quality and performance. For instance, the impermeability of the coatings is the criterion for the corrosion resistance and thus, fully dense coatings can act as real corrosion barrier coatings. Our previous study has demonstrated the good corrosion properties of high-pressure cold-sprayed (HPCS) Ni and NiCu coatings whereas the present study focuses on the analysis of structural characteristics behind the dense coatings. Microstructures of as-sprayed and heat-treated HPCS Ni, Ni20Cu and Ni20Cu + Al2O3 coatings have been evaluated with FESEM from top-view direction. This revealed clearly particle deformation and particle boundaries whereas particle bonding was evaluated with cavitation–erosion test. Density was proven with Corrodkote test and impermeable HPCS NiCu + Al2O3 coating structures were achieved. Furthermore, cavitation–erosion resistance of NiCu coating was improved by heat treatment.

Microstructural analysis of high-pressure cold-sprayed Ni, NiCu and NiCu+Al2O3 coatings / Koivuluoto, Heli; Bolelli, Giovanni; Milanti, Andrea; Lusvarghi, Luca; Vuoristo, Petri. - In: SURFACE & COATINGS TECHNOLOGY. - ISSN 0257-8972. - STAMPA. - 268:(2015), pp. 224-229. [10.1016/j.surfcoat.2014.09.007]

Microstructural analysis of high-pressure cold-sprayed Ni, NiCu and NiCu+Al2O3 coatings

BOLELLI, Giovanni;LUSVARGHI, Luca;
2015

Abstract

Cold spraying has shown its potential to produce metallic and composite coatings with high quality and performance. For instance, the impermeability of the coatings is the criterion for the corrosion resistance and thus, fully dense coatings can act as real corrosion barrier coatings. Our previous study has demonstrated the good corrosion properties of high-pressure cold-sprayed (HPCS) Ni and NiCu coatings whereas the present study focuses on the analysis of structural characteristics behind the dense coatings. Microstructures of as-sprayed and heat-treated HPCS Ni, Ni20Cu and Ni20Cu + Al2O3 coatings have been evaluated with FESEM from top-view direction. This revealed clearly particle deformation and particle boundaries whereas particle bonding was evaluated with cavitation–erosion test. Density was proven with Corrodkote test and impermeable HPCS NiCu + Al2O3 coating structures were achieved. Furthermore, cavitation–erosion resistance of NiCu coating was improved by heat treatment.
2015
16-set-2014
268
224
229
Microstructural analysis of high-pressure cold-sprayed Ni, NiCu and NiCu+Al2O3 coatings / Koivuluoto, Heli; Bolelli, Giovanni; Milanti, Andrea; Lusvarghi, Luca; Vuoristo, Petri. - In: SURFACE & COATINGS TECHNOLOGY. - ISSN 0257-8972. - STAMPA. - 268:(2015), pp. 224-229. [10.1016/j.surfcoat.2014.09.007]
Koivuluoto, Heli; Bolelli, Giovanni; Milanti, Andrea; Lusvarghi, Luca; Vuoristo, Petri
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Licenza Creative Commons
I metadati presenti in IRIS UNIMORE sono rilasciati con licenza Creative Commons CC0 1.0 Universal, mentre i file delle pubblicazioni sono rilasciati con licenza Attribuzione 4.0 Internazionale (CC BY 4.0), salvo diversa indicazione.
In caso di violazione di copyright, contattare Supporto Iris

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11380/1073366
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 30
  • ???jsp.display-item.citation.isi??? 22
social impact